Activity Stream

less than 3 days from ordering it my clutch kit arrived from rock auto! boy they're fast :thumbs_up_smiley: we ran out of time this week to fire up...

less than 3 days from ordering it my clutch kit arrived from rock auto! boy they're fast :thumbs_up_smiley: we ran out of time this week to fire up...

https://youtu.be/JSprlWdEpFs?si=R01CMLMCsEUnKQev Skip the roll playing in the middle ...

You need a proper welder or. metalurgist to work out if they can be cut and welded or new made from scratch. Or find another steering rack with more...

Yep through the stub with a key way to stop them turning and a not and split pin on the end.

Are these bolted through at the other end ?

Unfortunately I can't use bolt on one as my steering goes through the stub axle as per pic.

the mechanical fan from the truck the engine was out of is still bolted in place. i have a 16" pusher fan that we'll wire up for when we run ashley's...

The latest Gasser shows a Pop built in the 70's with viva front & Jag rear..........

I moderate rods n sods, but Retro Rides is my go-to forum now. Such varied content, nobody runs anyone elses cars down, and some very clever people...

I cannot post any pictures now but. The willys is pretty much finished and at my house now. All going well im taking it to penny's diner Sunday...

Hi Malc the more the merrier you should get the long distance award and a warm welcome

Hopefully you can see mine in the pic. Made from 1'' en8 and bent tosuit the ackerman angle. See if you can copy something similar as a mock up to...

I have for sale a propshaft from a 1970 olds cutlass which had a 350 and a th400 transmission has a dent towards the uj end but ideal if you just...