lancelot link
18-07-08, 10:45 AM
I have been asked to list this for a friend ....its the original development car for the Dooster range of kits . The one that was kept around for demonstration purposes and further development ideas as the kits developed.
The car has changed a little since built but basically is the same.
FORD PINTO 2.0 / 5 SPD.
CORTINA AXLES
ONE-PIECE ROADSTER BODY ( DOORS CUT OUT BUT BOLTED SHUT , WILL RE-OPEN )
The car is looking a bit scruffy on the paint and interior , mainly due to the fact that it has been used constantly for the last 7 years and only received ongoing maintenance rather than cosmetics.....could easily be facelifted for a more traditional feel....
Being offered ready to go with a full Mot / tax etc....drive away in a cheap 1932 !!
£3600 ono
http://i5.photobucket.com/albums/y184/lancelotlink/Photo-0003.jpg
http://i5.photobucket.com/albums/y184/lancelotlink/Photo-0004.jpg
http://i5.photobucket.com/albums/y184/lancelotlink/Photo-0005.jpg
07970 636986
I have access to all the parts needed to give this a more traditional feel ....16'' steels , whitewalls , grille , bonnet , satin paint etc. Would probably cost about £7-800 if we did it all in , so you could have a channeled '32 Roadster on the road for the Hayride for about £4500 !!
The car has changed a little since built but basically is the same.
FORD PINTO 2.0 / 5 SPD.
CORTINA AXLES
ONE-PIECE ROADSTER BODY ( DOORS CUT OUT BUT BOLTED SHUT , WILL RE-OPEN )
The car is looking a bit scruffy on the paint and interior , mainly due to the fact that it has been used constantly for the last 7 years and only received ongoing maintenance rather than cosmetics.....could easily be facelifted for a more traditional feel....
Being offered ready to go with a full Mot / tax etc....drive away in a cheap 1932 !!
£3600 ono
http://i5.photobucket.com/albums/y184/lancelotlink/Photo-0003.jpg
http://i5.photobucket.com/albums/y184/lancelotlink/Photo-0004.jpg
http://i5.photobucket.com/albums/y184/lancelotlink/Photo-0005.jpg
07970 636986
I have access to all the parts needed to give this a more traditional feel ....16'' steels , whitewalls , grille , bonnet , satin paint etc. Would probably cost about £7-800 if we did it all in , so you could have a channeled '32 Roadster on the road for the Hayride for about £4500 !!