1928twodoorsedan
23-09-08, 06:02 PM
in my never ending quest to get enough usable parts to put together a working i-beam front end, i now need-
a pair of perch pins- any finish, dont even need to have the spring eyes on em as they're being used on a spring-behind setup, as long as the shank and thread are good thats fine. cheap as poss please.
a pair of lower steering arms for 37-41 spindles, 3-3/4" drop if poss, if not ile take anything i can modify to fit my setup. again, finish unimportant and the cheaper the better.
i could also do with a upper steering arm for a cowl steer type setup, i.e. front-to-back steering not side-to-side. i need it to be the solid plate type not the 'loop' type.
i have various other little bits for an i-beam front end i can trade for them if you like, i will put a for sale thread up shortly with them in.
a pair of perch pins- any finish, dont even need to have the spring eyes on em as they're being used on a spring-behind setup, as long as the shank and thread are good thats fine. cheap as poss please.
a pair of lower steering arms for 37-41 spindles, 3-3/4" drop if poss, if not ile take anything i can modify to fit my setup. again, finish unimportant and the cheaper the better.
i could also do with a upper steering arm for a cowl steer type setup, i.e. front-to-back steering not side-to-side. i need it to be the solid plate type not the 'loop' type.
i have various other little bits for an i-beam front end i can trade for them if you like, i will put a for sale thread up shortly with them in.