The 32 - 3window build off entry post

[Drakie]

This Is a kit that you need but as long as its a 32 - 3 window 1:25th it dont matter
http://i114.photobucket.com/albums/n269/sa341/32pic.jpg
Ok if you want to join our little build off please put your name here so we know who is doing it.
RULES the kit must not be any more than £15 to buy as old and rare kits can be expensive and we are coming upto Christmas. rule 2 we will all have the same kit what you do with it is up to you, as long as you have the same body and floor pan it dont matter, chop it, channel it, drag it, custom it it dont matter, want to change the engine do it! Start date is 1st of Jan then we all have time to get the kit, as if you have to order one that takes time!
Drakie.
You have to use the body and floor pan but other than that you are free to do whatever you want with it. You can use any scrap/sticky tape/paint/other bits as you wish. Remember it's a photo contest though so overall image is crucial.
You can build it in whatever style that you fancy.
The Competition will run for at least 2 months.End date will be in March, to be decided.
Your final presentation will be four photos. We are working on the theory that everybody must know somebody that could take a decent set of photo's for them in this digital age!

These rules are the easiest to work with for a 'first time' event. We look like having more than one prize so will decide before January what prize categories there will be.
This is meant to be a bit of 'rod related' fun so please enter into the spirit of it. I haven't made a model car since the seventies so you are not alone in your apprehension! Good Luck Everyone!
Plumcars.

Please put your forum user name and your name on this post, The Build off will start on the 1st of Jan and run for 2 month's untill March.
Many Thanks.
I will Start,

Drakie - Martin Drake

[pilgrim]

Martin can we have a pic of the kit we are sposed to use please?

Pilgrim - Graham Cooke.

[Drakie]

Martin can we have a pic of the kit we are sposed to use please?

Pilgrim - Graham Cooke.
Done and pasted above Graham :)

[Brizey]

"Brizey" - Brian Lucas

[plumpcars]

Plumpcars. Steve Hale

[englishedsel]

Englishedsel. Chris Walker.

I already have a few 3 window kits but not the new Revell re-release.. So can I use one of those instead.

[WB54]

WB54 - Phil Sweeney

Good luck and happy building.

[sk8erdave]

sk8erdave-David Allen

Below, it says "same body and floor pan", then "same body"

Do we all have to have body and chassis, or just have to have the body?

And, how many entrys is one person allowed?

Has anyone found a source for the kit yet?

[Drakie]

Englishedsel. Chris Walker.

I already have a few 3 window kits but not the new Revell re-release.. So can I use one of those instead.
Yes Chris as long as its a 3 window 32 1:25 kit it dont matter even if its not a revell kit, as long as we all build the same make/model/year/scale mate

[plumpcars]

I'm currently in discusion with Revell about the kit. Please bear with me!

[Drakie]

sk8erdave-David Allen

Below, it says "same body and floor pan", then "same body"

And, how many entrys is one person allowed?

Has anyone found a source for the kit yet?
Sorry typo on that one as we have some that are having a go at modeling for the first time and people that build all the time to make it a level plain for all type's of skilled builders the body & florpan must be used as it makes it easy for the beginers and tough for the skilled as its a bit of fun we dont want to set it too hard and make others feel they wouldnt be able to join in.
As it is our first Build Off to make it fair and just and fun for all, plus keep the cost down it is one entry each.
Steve is in talks about the surply of kits with revell for people that are not able to get one, we will update on this when we know more. Chris EnglishEdsel has a spare one if someone needs 1 as he stated on another post so dont worry we will get you all sorted out one way or another ;)

[BRIT DIGGER]

"sizzlin sid." Sid Slattery.

Sid.

[31hillard]

31hillard

dale hillard

[plumpcars]

http://www.anticsonline.co.uk/463_1_2893348.html

You can order direct from this guy. I've spoken to him and he will supply as many as he can.
Buying any rod kit in bulk is impossible as apparently stocks are not held in great numbers in this country. Even Revell could not help.

[Equipped28]

vonmerkin

Harley Peters

i have a oldish revell 32 3window kit so i hope thats ok

[plumpcars]

vonmerkin

Harley Peters

i have a oldish revell 32 3window kit so i hope thats ok

Yep!

[Kustom54]

Kustom54

Mark Birchmore

I already have the Revell kit as well..

[redline robbie]

redline robbie. robbie smith. all ready got a three window and would love to enter. but the floor pan cant be cut up at all right? everything else free game

[scottie]

count me in

scottie....graham scott

[plumpcars]

redline robbie. robbie smith. all ready got a three window and would love to enter. but the floor pan cant be cut up at all right? everything else free game

I'd have to check with Drakie but I would think that some modifying/ cutting of the floorpan may be allowable. That doesn't mean that you can take away 90% of it though!

[Nutrocker]

nutrocker--Pete Ayres

already have the kit

[Drakie]

I'd have to check with Drakie but I would think that some modifying/ cutting of the floorpan may be allowable. That doesn't mean that you can take away 90% of it though!
I think a bit of modding is aloud as in modding to fit a motor an so on is a ok with me.

[35coupe]

35 coupe - simon webber

think ive already got a kit somewhere

[chaley]

chaley - Chaley Wraith
I got mine about 5 years ago for Christmas!
Note clever use of decals here!:D

http://i212.photobucket.com/albums/cc289/cswraith/DSCF2033.jpg
Chaley

[plumpcars]

It seems that most people have the kit which is good news. If you have not, or can not find one please pm me.

[BlastedC10]

I,m IN.

BlastedC10 , Pete Evans.

[Doug]

I'll have a go...

Doug Armstrong

[sk8erdave]

i'll have to buy it next week when funds permit.
cheers for the website.

[rem]

I'll have a go if I can find one. 'Course, you know what the last model I finished was, a couple of years ago...

Rem
Andy Remnant

[billsmut]

just ordered the kit. been ages since i built a model kit.... should be fun.

James O'Driscoll

[Fatguyz]

Fatguyz - Jason Springate

FG:cool:

[englishrodder]

Englishrodder - David Bennett...

Best get me a kit sorted then!

[jsf55]

john fraser ... as long as u guys don't mind :D

[plumpcars]

john fraser ... as long as u guys don't mind :D

Good to have you John...you mods aren't a bad bunch! ;)

[surfmonkey]

i`ve a revell `32 kit partially started...if i rip it apart and start again will that be ok...i`m useless at model making

[billsmut]

i`m useless at model making

i worked it out today last time i built a model, was 22 years ago and that didnt turn out to good.

[pauline als diner]

i think i will have to give it a go

need to find a kit

[chaley]

So far I make that 25 entries, that'll be a whole lot of bad eyes and headaches out there:D
Chaley

[Guernsey Boy]

ah hell, why not.

guernsey boy - neil etasse

[Flathead Elmo]

Flathead Elmo

Elliot Morris

I have a 5 window I just started playing with...can I use that or do I have to start afresh?

[Drakie]

Flathead Elmo

Elliot Morris

I have a 5 window I just started playing with...can I use that or do I have to start afresh?
Sorry Elliot you will have to start a fresh one as the kit is a 32 - 3 window as thats what every one will be building.

[Drakie]

john fraser ... as long as u guys don't mind :D
Not at all John look forward to your build being submitted mate.

[model.A.keith]

Can anybody point me in the direction where to get a kit from, tried egay can't seem to find one

thanks

Keith

[surfmonkey]

here i go then

monkey


tim odell


dont laugh at my end result !!

[pauline als diner]

Can anybody point me in the direction where to get a kit from, tried egay can't seem to find one

thanks

Keith


me to:confused:

i must be mad have never built one before

[plumpcars]

UPDATE:

Firstly it's great to see so many people having a go and joining in. This was designed as a bit of fun and I'm glad that people see it that way. There are obviously some who have built before and others who have not....don't worry, Drakie and I will come up with a few ways to win! On that subject we now have a handful of prizes. Odgie(Shedster) has very kindly offered one of his T shirts...not sure if he means a new business related one or just one out of his wardrobe! ;) Thanks Odgie, very much appreciated. The NSRA have also come up with the goods and offered a selection of things so some rewards for your efforts are available.
On the kit front I have spoken to this guy:
http://www.anticsonline.co.uk/463_1_2893348.html
He discussed things with a Revell rep and is getting in as many as he can. They are rarer than we thought, to buy in bulk proved impossible even going through Revell. Buying one is straightforward enough but in bulk is impossible. Try this guy and if you are still stuck please pm me and I'll try and help. I did speak to him on the phone and explained what we were doing.
So, any more entrants?

[model.A.keith]

ok kit ordered, (THANKS PLUMPCARS) so here we go !



model.A.keith



Keith Elderkin

[plumpcars]

ANOTHER PRIZE....

We have a further prize offered by Surfmonkey which I forgot to mention above. He is offering a drawing of the relevant winner's car, bike or whatever. If you've studied his work you will know what a valuable prize this is. Thanks Tim! :):)

http://www.monkey-inc.co.uk/

[WB54]

I'll chuck in 2 A3 prints for prizes. One is of the Beebe and Mulligan Fighting Irish Slingshot, the other of Ron Hopes Rat Trap Fuel Altered, divvy them up or make them one prize, up to you guys organising to award them.
Cheers
Phil

[farncombe pop]

farncombe pop

paul bulbeck [jim-bob]

[needa100e]

needa100e-Andrew Bulbeck

[plumpcars]

I'll chuck in 2 A3 prints for prizes. One is of the Beebe and Mulligan Fighting Irish Slingshot, the other of Ron Hopes Rat Trap Fuel Altered, divvy them up or make them one prize, up to you guys organising to award them.
Cheers
Phil

Thanks Phil....that's really kind of you!
So come on....some great prizes and well worth joining in whatever your skill level.

[Fatguyz]

I'll chuck in 2 A3 prints for prizes. One is of the Beebe and Mulligan Fighting Irish Slingshot, the other of Ron Hopes Rat Trap Fuel Altered, divvy them up or make them one prize, up to you guys organising to award them.
Cheers
Phil

saw the beebe and mulligan slingshot at bakersfield this year......it was so hot i bought a "Fighting Irish" baseball cap......nice guys......sorry OT

PS......doing a search on EBAY for 32 Ford Model Revell don't chuck up much but if you actually look in some of the ebay "shops" theres plenty of 32 kits......i've gone and got something a little different.

FG:o

[plumpcars]

PRIZE UPDATE:

NSRA Various.
Shedster T shirt.
Surfmonkey Comissioned drawing.
WB54 Two drag racing prints.

[plumpcars]

[quote=i've gone and got something a little different.

FG:o[/quote]

As long as it's a 3 window... [:O]

[pauline als diner]

ok thank you kit order

pauline als diner - pauline cox

[chaley]

Thank you everyone for the great prizes, I thought you'd only get world wide fame and adulation as a prize, but with the size of the prize pot if you finish the build it looks like you could get a prize!!!:D Well it's the only way that I'll get one:o
Chaley

[englishedsel]

Some very generous prize offers..well done to all contributors and contestants for joining in the spirit of the thing and remember it is supposed to be for fun...

[surfmonkey]

oh well looks like there wont be any new cars at the shows next year....the world and its mother are building models instead :eek:

[32FORD]

32FORD-Rick Palmer

Got one of these kits up in the loft, amongst others for that rainy day that never seems to come :-)

[farncombe pop]

Prize update, the Surrey street rodders would like to add a 2008 and a as yet unseen in public 2009 wheelsday t shirt to the pile :)

[scottie]

how is the voting going to work?

who votes??

best paint etc ??


scottie

[surfmonkey]

Prize update, the Surrey street rodders would like to add a 2008 and a as yet unseen in public 2009 wheelsday t shirt to the pile :)

can they donate a 2007 one as well...i did the artwork and didn`t manage to get one :rolleyes:

[Drakie]

Thankyou to everyone that have donated prizes to our little bit of fun Fantastic!!! Many Thanks Everyone! category's will be talked over and we will (should have them on in a few days) after a phone call to sort them all out! due to being a bit busy today i haven't had chance to do much on the computer an have a time window of about 5 min tonight ! but i will be on the case tomorrow and we will get things sorted out!
Glad we have such a fantastic response to our build off!!!

[plumpcars]

As Drakie says we will talk over the weekend and get the prizes /classes sorted out.
Big thanks to the Surrey Street Rodders as well for their generous donation. I'm staggered at the prize responses on here! :):)

[kapri]

I would love to join in but seeing as the only thing I've ever stuck together succesfully with glue is my fingers I'll wish you all well....look forward to the results.

[Mart]

Sounds like a great idea. I won't be doing one, but can I make a suggestion - It might be worth mentioning this on the general discussion forum - I don't know if I'm typical but I rarely click on the art forum, and it is tucked right at the bottom of the page. There might be someone who only checks the general forum who wants to take part or provide a prize.
Mart.

[Drakie]

Just ordered mine from your link Steve but it says they're out of stock , here's hoping he gets some in soon ... Rebecca's warming my glue pot up as we speak , and I'm sharpening my smallest and most delicate hammers [8)]
My Contact is on holiday until the 10th but will ring him and sort it out if we still need kits by that point.

[plumpcars]

The guy at the link I gave had spoken to a Revell rep and was getting them in especially. Nice to know your glue pot is in good hands :D

[Drakie]

Here we go Everyone
This is my list so far!


NSRA 32 FORD 3 WINDOW BUILD OFF CONTESTANTS



USERNAMES – REAL NAMES


Drakie - Martin Drake


Pilgrim - Graham Cooke.


"Brizey" - Brian Lucas


Plumpcars. Steve Hale


Englishedsel. Chris Walker.


WB54 - Phil Sweeney


sk8erdave-David Allen


"sizzlin sid." Sid Slattery.


31hillard dale hillard


vonmerkin Harley Peters


Kustom54 Mark Birchmore


redline robbie. robbie smith


scottie....graham scott


nutrocker--Pete Ayres


35 coupe - simon webber


chaley - Chaley Wraith


BlastedC10 , Pete Evans


Doug - Doug Armstrong


Rem Andy Remnant


Billsmut-James O'Driscoll


Fatguyz - Jason Springate


Englishrodder - David Bennett


Jsf55- john fraser


guernsey boy - neil etasse


Flathead Elmo - Elliot Morris


SurfMonkey tim odell


model.A.keith - Keith Elderkin


farncombe pop - paul bulbeck [jim-bob]


needa100e-Andrew Bulbeck


pauline als diner - pauline cox


"Ratty" Simon Read


32FORD-Rick Palmer


58’delray – Andy Heath


31 Entry’s!

[tshirt_tony]

I'm in.
I've got the kit.
tshirt_tony
Tony Waring.

[Drakie]

Nice one Tony, Build Off starts 1st of Jan, Best Of Luck To Everyone!;)


I'm in.
I've got the kit.
tshirt_tony
Tony Waring.

[Battersea Boys]

Yep, battersea boys milton homan
where do I get the kit..........

[plumpcars]

See posts above Milton....:)

[Flathead Elmo]

The guy at the link I gave had spoken to a Revell rep and was getting them in especially. Nice to know your glue pot is in good hands :D

I phoned that guy on the link and he said he didn't have any and might not be able to get them as the kit is now quite old...even if he could it would be jan feb before he got them... so bought one off ebay instead.

[plumpcars]

Thats strange.... I spoke to him and he said he was sorting an order with the rep! The kit is current as well....Although it has appeared in various versions over the years. I'll call him again on monday.
There are plenty available in the USA but the postage brings the kit up to about £20.00.

[plumpcars]

CLASS STRUCTURE.

Ok here's the prize structure made possible by the generosity of the prize givers:

BEST BOX BUILD.
Built exactly as it comes out of the box. No additional or modified parts to be used. Just add paint and glue.

BEST MODIFIED.
Use the body/floorpan and then do what you want to it. You can add other parts or take parts off as you wish.

BEST OVERALL.
Judged from every entry.

BEST PAINT.
Could be quality...could be radical...could be subtle. Judged from every entry.

BEST NOVICE.
We will rely on honesty here! If you really have never built, or maybe one or two many years back then this is for you.

When you submit your photos you will be asked to put in a write up whether your model is entered as box built or modified. If you are entering as a novice you will need to add that also. :)

[Drakie]

Thanks Steve for putting them up, and a great many thanks go out to everyone that are making this happen, from the NSRA for letting us do this, to everyone that has given us prizes, to all of you that will be putting your time and effort in to building your models. Without any of you thing wouldnt have happened.
Thankyou all.
But lets not forget the main thing, on the 1st of jan, lets all have FUN!

[surfmonkey]

i dont see an abortion class...so not sure where my entry will fit in

[Fatguyz]

i dont see an abortion class...so not sure where my entry will fit in

well one of the models that i have purchased, AMT Lil Deuce Coupe, is blood red:eek:

FG

[englishedsel]

So your the one who out bid me on E-Bay...LoL not too worry have got 1 in the attic

[Fatguyz]

:eek:
So your the one who out bid me on E-Bay...LoL not too worry have got 1 in the attic


dont do ebay...not me:cool:

FG

[the_hotrod_freak]

im ready to give it a go
the_hotrod_freak
matt jones[xx(]

[englishedsel]

Sorry FG, ..****ed it up again:rolleyes:..:)

[pilgrim]

Its not an easy kit to get hold of is it?:confused:

If anyone has a 'spare' please let me know!:o:D

[Fatguyz]

Its not an easy kit to get hold of is it?:confused:

If anyone has a 'spare' please let me know!:o:D

There are plenty of other 32 coupe kits out there........look in the ebay shops cos the search engine doesnt seem to throw them up

FG

[the_hotrod_freak]

Its not an easy kit to get hold of is it?:confused:



every where i looked is out of stock and i ended up buying of us/fleaybay

[Strange Mark]

Strange Mark - Mark Wilkinson
I,ll give it a go too if i can find a kit, though the eyesights not what it was !

[scottie]

dont know if this will help anyone but ive got a 1/24th diecast 3 window someone could poss use the body/floorplan from
if its allowed

£7 posted

http://i34.photobucket.com/albums/d111/tarmacghost/STA60041.jpg

[Shedster]

Only just got round to reading this thread - hey, it's going great eh? The T-shirt will be a proper new one (or you can have one I've already worn if you're really into that sort of thing...). Stick 'beesa350' into ebay sellers for designs - I know they're bike related, but the winner gets a choice at least... The judges can decide how they give it out, s'fine by me.

Good luck everybody - I'm quite excited meself to see what happens... :-)

[rem]

They're just like the real thing - Roadsters and 5-windows everywhere, but no bloody 3-windows!

[the_hotrod_freak]

http://cgi.ebay.co.uk/Revell-1-25-32-Ford-Coupe-RMX852024_W0QQitemZ370104045546QQcmdZViewItemQQptZ LH_DefaultDomain_0?hash=item370104045546&_trksid=p3286.c0.m14&_trkparms=72%3A1298%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318

[Drakie]

Sorry but the Build off is a Plastic 32 - 3 window so this can not be used.


dont know if this will help anyone but ive got a 1/24th diecast 3 window someone could poss use the body/floorplan from
if its allowed

£7 posted

[scottie]

no probs, i see the last ebay link in the US the guy has plenty for sale


scottie

[Guernsey Boy]

its on!!!

http://i2.photobucket.com/albums/y49/flamin64/Photo8-1.jpg

[Drakie]

there are a few still without a kit i see, the place i was going to put up the number for is away untill the the 10th so i will be in touch with them as soon as i can and if he has any i will make sure he keeps hold of them for you. so list your names and at least i will know how many to try an get.

[Drakie]

FANTASTIC STUFF MATE! glad you have yours! I aint even got my kit yet!! how bad is that!


its on!!!

http://i2.photobucket.com/albums/y49/flamin64/Photo8-1.jpg

[Drakie]

Fantastic you have a pm, well in a mo when i write you one :D


Good luck everybody - I'm quite excited meself to see what happens... :-)

[plumpcars]

Got mine today thanks to Brizey! great kit by the looks of it....
Brizey has suggested putting up a starters guide for novices so I'll be speaking to Drakey about that.

[Drakie]

Brizey has suggested putting up a starters guide for novices so I'll be speaking to Drakey about that.
Good idea steve like it. will have a chat with you soon mate.

[Von Dutch]

Just PM'd you Martin.

[pauline als diner]

Got mine today thanks to Brizey! great kit by the looks of it....
Brizey has suggested putting up a starters guide for novices so I'll be speaking to Drakey about that.

I need that not got a clue on how to do them knowing me i will glue my fingers togther. :o

[the_hotrod_freak]

utube as some stuff on building models http://www.youtube.com/watch?v=XH6a3yKNLXA

[Drakie]

Just PM'd you Martin.
Got it Simon, you have one back any problems give me a shout ;)

[WB54]

I need that not got a clue on how to do them knowing me i will glue my fingers togther. :o

if you've never built a kit before best thing to do is follow the instructions to the letter.

Obviously results get better with practice but concentrate of having piece nicely painted, in realistic colours using a range of shades.

When gluing bits together try not to use too much glue. Anything that can be glued before painting then do so.

With regards to glues, a styrene glue by the likes of Humbrol will be fine. Take your time, be patient. Trial fit parts together before gluing them. wherever your working make sure you can leave the parts out to dry/set.

The 32's a nice kit, not too detailed or hard to build but gives very nice results for the first time builder.

[plumpcars]

And don't forget Pauline....novices get a great deal of respect just for joining in and having a go. I'm sure if you get stuck at all(No pun intended!) a quick pm to somebody on here will get you sorted....

[pauline als diner]

And don't forget Pauline....novices get a great deal of respect just for joining in and having a go. I'm sure if you get stuck at all(No pun intended!) a quick pm to somebody on here will get you sorted....

thank you will do and take my time with it to:)

[Drakie]

thank you will do and take my time with it to:)
The best thing is taking your time, plan every step and you should be ok and like steve says if you get stuck pm someone for advice first as it will take longer to fix something than to wait for some advice first.

[chaley]

if you've never built a kit before best thing to do is follow the instructions to the letter.

Obviously results get better with practice but concentrate of having piece nicely painted, in realistic colours using a range of shades.

When gluing bits together try not to use too much glue. Anything that can be glued before painting then do so.

With regards to glues, a styrene glue by the likes of Humbrol will be fine. Take your time, be patient. Trial fit parts together before gluing them. wherever your working make sure you can leave the parts out to dry/set.

The 32's a nice kit, not too detailed or hard to build but gives very nice results for the first time builder.


Thank you for the advice,I've only ever built one kit before and you know that I said I lost some bits from the kit? Well one of the bits I've lost are the instructions, but hey how hard can it be? ( I have some winging their way to me as I type) I plan on just cutting the hell out of the kit and seeing how it pans out, that's the way I work on cars so expect it to be finished in about 5 years:rolleyes: ( thought I'd get that in first)
I'm looking forward to starting and am planing on kicking Liz off her deck to find space, building a model is much more important than that silly work stuff!:D
When I do start expect some daft questions from this end:o
Chaley

[Drakie]

Thank you for the advice,I've only ever built one kit before and you know that I said I lost some bits from the kit? Well one of the bits I've lost are the instructions, but hey how hard can it be? ( I have some winging their way to me as I type) I plan on just cutting the hell out of the kit and seeing how it pans out, that's the way I work on cars so expect it to be finished in about 5 years:rolleyes: ( thought I'd get that in first)
I'm looking forward to starting and am planing on kicking Liz off her deck to find space, building a model is much more important than that silly work stuff!:D
When I do start expect some daft questions from this end:o
Chaley
is it the revell kit? someone may have the destuctions for you failing that i will scan mine when i get it and email you them if that helps.

[chaley]

is it the revell kit? someone may have the destuctions for you failing that i will scan mine when i get it and email you them if that helps.
Cheers Dude, I'll be in touch if the ones on the way are wrong. I think that someone may be trying to nobble me:D
Chaley

[pilgrim]

Lets rock!

http://img.photobucket.com/albums/v256/Morbius666/2008_12080027.jpg

Spent 3 days scouring the UK via interweb.:o
Rang local model shop -
"Have you got one?"
"Yes"
"I'll take it."[B)]
Game on.

[billsmut]

we arew aloud to steal parts from other model kits i take it :D

[pilgrim]

we arew aloud to steal parts from other model kits i take it :D

I hope so, cos Im gonna be squeezin this in!:eek::eek::eek:

http://img.photobucket.com/albums/v256/Morbius666/2008_08290110.jpg

[plumpcars]

Use parts from any other kits to go in the modified class or build box stock to go in the ......box stock class. :D
Looks like I need to step up a gear in the way I'm thinking of doing mine:o

[Fatguyz]

went to loft and got box of broken models (pic 1)

mess about with the various top fuel engines from old models.....also have a 427 engine from a cobra model and a NOS engine (pic 2)

1/16 scale blown hemi engine from Prudhomme dragster sat in 1/24 scale lil deuce coupe model....probably to going to use this kit but may use a few parts (pic 3)

Lil Deuce coupe kit ok....but its got fenders[xx(] (pic 4)

Like a kid in a toy shop.....been years since i made any models...........i'll be in the modified class by the way:cool:

FG

[englishedsel]

Chaley I can scan the instructions for the Revell kit for you now if you need them ...

[chaley]

Chaley I can scan the instructions for the Revell kit for you now if you need them ...
Cheers, I got a call from work earlier to ask what a fax to me was all about:o and I should grow up[:(!] So sorted now thanks. Only thing is the bloke that found the fax is into 40k battle games so builds a lot of models and now wants to play[:O] I'm going to try and talk him down or I won't build the best 32 in town;)
Chaley

[englishedsel]

Tell him it's a "Hot Rod " thing and you have to be a member...LoL

[Von Dutch]

Well as long as I can get a hold of the model, I'm in.(Many thanks Drakie) Entry number 30something -Simon Allan.

[Drakie]

We will do all we can to get kits out to people we can, we now have 36 entrys to the build off and that is just amazing! Thankyou Everyone!

[Drakie]

I spoke to a bloke that does mail order kits and he is going to check stock and get back to me tomorrow night, so we will see what he has!

[anglia-boy]

Anglia-boy - Ethan Lisle


still looking for a model lol

help

[31hillard]

can i use a diecast 1:24 model?just seems there are more of them about!

[pilgrim]

can i use a diecast 1:24 model?just seems there are more of them about!

Someone else asked this, and got a nay.:o

[plumpcars]

Die cast is out I'm afraid. Dale and Ethan I've mailed you both....

[Drakie]

Its all looking good for the first of jan an i cant wait to get stuck in an get building! ;) still not got my kit i will pick it up with a copy of custom car as i have been told i will be getting a new socket set!!!! [:O] but alas its a bit smaller than them to use on the build off :D

[sk8erdave]

i hope the guy who does the mail order has some, cos ive got my engine, suspension and wheels waiting lol

[Drakie]

I will let you know asap if on the off chance he dont have any i will be having a word with my model shop see if he will do some mail order ones for me as a long standing customer of there's! but will sort that if i have too so we still have plenty of options for kits and if they all fail, steve or i will find someone else!

[Drakie]

Ok, not good news on one front as i had a call and the mail order place had no kits at all, but dont worry too much as i am off to pick up my kit tomorrow and i will see if they will get some in, and i know they can so all i will do is have a word and see if they will mail order some out, i will let you know tomorrow on that front failing that i will go though the internet with a fine tooth combe to see if i can get one that way! i wont give up! well not unless i drop dead first!

[Fatguyz]

i tried like hell to get hold of one over here and nowt.............my mate is out in the states.....well on a plane back now and i didnt even think to ask him to pick some up until about 10 minutes ago. Theres a fair few other 32 kits out there.....mayevbe if the availablity is not good on 32 coupes we could bend the rules a little and tstretch to 32 roadsters, pick ups and vickys...............want as many people involved as possible :)

FG:cool:

[plumpcars]

I know an internet seller with a few left. PM me if you're stuck.

[farncombe pop]

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=200285110465&ssPageName=STRK:MEWA:IT&ih=010

[WB54]

I have a kit but it appears I've robbed half the bits already. Ordered another one on ebay US. Got it for $24 all in, works out a t £16.00 or so, might be eaiser to look to the US for them.

[Fatguyz]

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=200285110465&ssPageName=STRK:MEWA:IT&ih=010

Thats the kit i got the other week....although not being built as per instructions:rolleyes:.......messing about with old parts to see whats gonna look better.....gasser methinks:D

FG

[Brizey]

Tower Hobbies in the states has some in stock $16 + p/p. The site has a currency calc. too.
I`ve used this company in the past with good results, though this time of year shipping may be slow...
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXLRM5&P=W

[plumpcars]

I've been steering people to a dealer who had a batch....we've now got him down to his last two!
Drakie's model shop will mail them out for a fair price. Details will be put up by him this evening.

[rem]

Has the Rockin' Rods one got separate fenders, or are they molded with the chassis? I know the Revell one has a nice chassis - just gotta get hold of one!

[pilgrim]

We can get started cant we? Not that I already have, obviously.:confused::D

[farncombe pop]

Has the Rockin' Rods one got separate fenders, or are they molded with the chassis? I know the Revell one has a nice chassis - just gotta get hold of one!



http://i270.photobucket.com/albums/jj119/farncombepop/rockinrods.jpg

[Brizey]

Has the Rockin' Rods one got separate fenders, or are they molded with the chassis?
One piece frame/fender moulding on that one Andy...:(

[Drakie]

Ok I have been to my model shop and he will mail order the kits out! he has ordered i few extra's! but for the price of £16 including p&p I dont think its bad at all!
So If you want a kit this is what you will need to know!
HALIFAX MODELLERS WORLD
OPEN TIMES
MON- 10.30-17.30
TUE'S- 10.30-17.30
WEN'S-CLOSED
THURS- 10.30-17.30
FRI- 10.30-1700
SAT- 09.30-1700
SUN- 10.30-16-30
CALL THEM ON
01422 349157
AN PLACE YOUR ORDER!

[Fatguyz]

One piece frame/fender moulding on that one Andy...:(

So does that mean that this kit is not "allowed"????????

FG:cool:

[rem]

So does that mean that this kit is not "allowed"????????

FG:cool:

No. I just wondered as I want to build a fenderless one.

[Fatguyz]

No. I just wondered as I want to build a fenderless one.

Andy,

i've got the kit here and building it fenderless is possible...although the rails would be a bit skinny:rolleyes:...........i've got two other sets of rails here which are good for fenderless although theres no swage line:mad:

FG:cool:

[plumpcars]

Kit is allowed Jason but you need to use the body and floorpan to be within the rules. You can modify either though taking away 99% might be taking it a little far! Fenderless is good...

[Drakie]

Well I would like to say thanks to all that have joined the build off and I bid you well for a few days! im off to germany tomorrow for a break away for a few days! see you all on the 19th or 20th depending how wacked i am when i get back! NO CHEATING WHILE IM GONE PMSL

[WB54]

Kit is allowed Jason but you need to use the body and floorpan to be within the rules. You can modify either though taking away 99% might be taking it a little far! Fenderless is good...

can the frame be Z'd to lower or pinched for fat tyres as long as the main chassis rails remain ?

[plumpcars]

Yes Phil....We just wanted people to use the frame/body as a starting point to level out the field somewhat. Modify it/chop/channel/section whatever...all is allowed.
However..... Just ending up with 5% of the original plastic would appear as 'not in the spirit of the game old boy'.
Really we wanted to keep the rules as loose as possible but have some sort of start point so that the judges could recognise what you all started with. I'm sure you'll all be happy with that.

[englishedsel]

Has the Rockin' Rods one got separate fenders, or are they molded with the chassis? I know the Revell one has a nice chassis - just gotta get hold of one!

I have got a spare Revell chassis if you need one...

[Fatguyz]

I have got a spare Revell chassis if you need one...

I've also got a spare chassis (AMT kit) and running boards/fenders. The chassis has the rear axle, prop and a single exhaust moulded into it though.

Also have spare hood (one piece) grill shell, bumpers, headlights, side pipes, single exhaust, dual exhaust, tyres, engines if anyone needs bits.

FG

[rem]

Thanks guys. Thanks to Steve I have now got a Revell kit on its way.


I have got a spare Revell chassis if you need one...


I've also got a spare chassis (AMT kit) and running boards/fenders. The chassis has the rear axle, prop and a single exhaust moulded into it though.

Also have spare hood (one piece) grill shell, bumpers, headlights, side pipes, single exhaust, dual exhaust, tyres, engines if anyone needs bits.

FG

[WB54]

Yes Phil....We just wanted people to use the frame/body as a starting point to level out the field somewhat. Modify it/chop/channel/section whatever...all is allowed.
However..... Just ending up with 5% of the original plastic would appear as 'not in the spirit of the game old boy'.
Really we wanted to keep the rules as loose as possible but have some sort of start point so that the judges could recognise what you all started with. I'm sure you'll all be happy with that.

will be doing all the above, cheers fella.

[plumpcars]

Pleased to see so many entering into the spirit of this!:)

[Wiggy]

Wiggy - Anne Josey

Novice Class if thats ok :o

[Hot Rod Widow]

Its arrived ... now some peace ... thats him sorted ..now I can use the control on the TV... its ok he only unpacking it ... not started it yet ...have to be nice to him, fox got into the garage last night and ate all the wires!!!

[jsf55]

For a minute then jane, i thought u were going into compition against elmo :)

[Hot Rod Widow]

For a minute then jane, i thought u were going into compition against elmo :)

you have obviously never seen me with a scalpel.....they do not make enough band aid

[jsf55]

LOL.... fair comment !

[plumpcars]

Was that the guy I put you on to Ratty? Thought he had 4 when I told you so what went wrong there then.
Try Drakie's guy on the details higher up. He knows about the competition.

[plumpcars]

Thats him Steve , his online ordering system is on the fritz so he received my Paypal with no order , in the meantime he'd sold out . He was real apologetic and helpful though , unfortunately not to the point of supplying ;-)

Or we could do as fatguyz suggested and bend the rules to include other styles of 32 , there's loads available out there if you want a Roadster or a Pick-up . Its not my competition though , so not for me to decide ...

Ring Drakie's guy..he should be able to send you one.
I'm surprised with that other guy...I just bought some bits from him and service was excellent and fast.

[Fatguyz]

first off....i'm doing this for the fun of it:D....its years since i built a model and yep i'm getting carried away....secondly.....i've got a bit of time on my hands as theres no sign of a job on the horizon before christmas :( so i'm getting stuck up messing about and mocking up with what looks right IMO. The pic shows my 32 3 window.....which started life as a 5 window.....so i guess im just owning up that i've modified a kit to suit the rules.....is it allowed is the question???????:rolleyes:

FG

[billsmut]

I know what u mean about the out of hand.... buying up other model kits because theyve got nice wheels or an engine you want.

havent even got my kit yet and ive already been spending.

[farncombe pop]

Has the time come to push the window just a tad and include five windows? seen a few of them on ebay.

[Hot Rod Widow]

but I bought Elmo a 3 window one especially! what will he do with 2 now!!!:eek:

[rem]

I asked what the shipping would be for this one from the States, as posted earlier in this thread. The reply was $10 for one, and an extra $2 for additonal ones, but that this was an "estimate only" for USPS First Class Air Mail. That seems a little optimistic to me, as although they don't weigh much, lightweight stuff can get charged on volume. There was a comment in his feedback that shipping was way more than quoted for something. Only real problem at the moment is how much the Christmas mail rush would hold up delivery.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=370104045546

I've sourced one elsewhere now, but even if this was $15 to post, it would still be less than £20 (I just got $1.49/£ on PayPal for something else).

[plumpcars]

We'd like to stick to 3w kits. Have been told that they may be short as Revell are about to bring out a 5w so may possibly have halted production on 3w's for a while. A number do appear on Ebay.Com as was said. I'll have another scout round and see what I can find.
So who does not have one at this point other than Ratty?

[pilgrim]

some shops to try here Ratty!

http://www.yell.com/super/model+shops/london&searchall=1?sem=g&cam=hobbies&refcd=GO4871425049S_model_shop_london&tsacr=GO1015653386

[englishedsel]

I get a few kits from the states and on average pay between $12 and $20 P/P. USPS is usually very good and it our postal service that ****'s it up and delays everything.

[sk8erdave]

i don't have one. :(

[Paul]

If I can get a kit can I play too...???

[plumpcars]

If I can get a kit can I play too...???

More the merrier Paul.....:)

[plumpcars]

http://cgi.ebay.co.uk/Revell-1-25-32-Ford-Coupe-RMX852024_W0QQitemZ370104045546QQcmdZViewItemQQptZ LH_DefaultDomain_0?hash=item370104045546&_trksid=p3286.c0.m14&_trkparms=72%3A1301%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318

I've dealt with these guys. I know it's The States but their postage is generally fair if you can't find one anywhere else.

[WB54]

I can see the headlines now "Nintendo shares plummet as Revell hits all time high !"...

[rem]

I noticed the HAMB is also having a model build-off! I think we've got more signed up to ours than they have :)

[billsmut]

my kit arrived this morning, so did the kit the engine is coming from and some seats for it as well.

:):):):)

[rem]

my kit arrived this morning, so did the kit the engine is coming from and some seats for it as well.

:):):):)

Mine arrived yesterday too, and I've already been raiding the parts pile and other kits for parts. Can we start yet? :D

[chaley]

Okay, so who's started their build early?
Come on own up!
I nearly started last night, but so far I haven't given in to temptation.
Chaley

[farncombe pop]

Okay, so who's started their build early?
Come on own up!
I nearly started last night, but so far I haven't given in to temptation.
Chaley
must not start.........must not start......i know my mum wanted me to ware boxing gloves for some reason :eek::D:D

[model.A.keith]

Okay, so who's started their build early?
Come on own up!
I nearly started last night, but so far I haven't given in to temptation.
Chaley

No kit yet !

[pauline als diner]

not me not got a kit yet:eek:

[Fatguyz]

Okay, so who's started their build early?
Come on own up!
I nearly started last night, but so far I haven't given in to temptation.
Chaley

well kinda:o.........modified a 5 window body into a 3 window (is this allowed???) and dismantling loads of old kits for bits and seeing what fits together.............but no glue or painting so technically no but probably possibly a little bit maybe:eek:

FG

[billsmut]

im looking more excited to starting than christmas lol:D:D:D

[the_hotrod_freak]

im being greedy and im doing 3 models. two custom and 1 stock. got my revell kit to day. :p

[WB54]

I'm also going to build 2 (I know we can only enter one) I'm not a big fan of 3 windows but it's a nice kit and I want one box stock as well.

[Brizey]

Sorry typo on that one as we have some that are having a go at modeling for the first time and people that build all the time to make it a level plain for all type's of skilled builders the body & florpan must be used as it makes it easy for the beginers and tough for the skilled as its a bit of fun we dont want to set it too hard and make others feel they wouldnt be able to join in.
As it is our first Build Off to make it fair and just and fun for all, plus keep the cost down it is one entry each.[/quote]

Posted earlier by Martin (Drakie), so best check with him or Steve (Plumpcars) on more than one car being eligible...
[quote=the_hotrod_freak;156881]im being greedy and im doing 3 models. two custom and 1 stock. got my revell kit to day. :p

[plumpcars]

It's one entry each and you need to start with a 3 window. The idea is to make a level playing field with not too many rules. Start date is Jan 1st but as with the real thing there is a plan of action needed before you start so balancing bits up on your bench is fine. Mine keep falling over though......Fatguyz I thought you had a 3w anyway?

[Fatguyz]

Fatguyz I thought you had a 3w anyway?

yes but that is now being done by Wiggy

FG:eek:

[scottie]

heres mine,,,,dont worry its not finished, its what im starting with, its going in for a full rebuild on the 1st of jan :p

http://i34.photobucket.com/albums/d111/tarmacghost/3w.jpg


scottie

[Drakie]

Well im back from the trip to Germany we had for a few days,
Ok, 1 Entry only,
Starts 1st of Jan,
Entry submission's will be from 1st March to 7th March (who to enter them too is yet still being sorted but we will let you know in plenty of time dont worry)
If you want a kit this is what you will need to know!
HALIFAX MODELLERS WORLD
OPEN TIMES
MON- 10.30-17.30
TUE'S- 10.30-17.30
WEN'S-CLOSED
THURS- 10.30-17.30
FRI- 10.30-1700
SAT- 09.30-1700
SUN- 10.30-16-30
CALL THEM ON
01422 349157
AN PLACE YOUR ORDER!
IF HE DONT HAVE ONE TELL HIM TO ORDER ONE!
YOU WILL STILL GET IT BEFORE 1st JAN.
But if you dont get one for a few days after 1st Jan wont worry you have 7 days to enter it in march! problem solved!

[the_hotrod_freak]

[xx(] i've never built a model before so im going to do the revell 32 as stock. and im doing the other 2 kits as customs. going to try and do a roof chop on one. then pick out the best shell before the glue-ing stage.

still got to get modeling paints and stuff

[plumpcars]

Martin, will speak to you over the next few days to tie up the loose ends.

[Drakie]

Ok steve give me a call anytime.

[rem]

This guy's still got four showing available:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=370104045546

Steve said he's used him I think, and total should be less than $30 which is still only (!)about £20

[plumpcars]

This guy's still got four showing available:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=370104045546

Steve said he's used him I think, and total should be less than $30 which is still only (!)about £20

I was just going to repost that ! I've used him and his postage is fair plus item goes out the next day. Worth a try. It's a big hobby shop rather than a little guy.

[farncombe pop]

3 ???? I can't get f*&king one of the c^%ting things :mad:

Gonna give up soon , Halifax chap hasn't any yet and said it could be the New Year before they arrive , and none of the US Ebayers I've contacted have even bothered to reply [:(!]

At this rate I'm going to have to work on my real car :eek: :D
This could get you started ;)

http://cgi.ebay.co.uk/FORD-COUPE-32-MODIFIED-RARE-1-25-REISSUE-NEW-KIT-21709_W0QQitemZ400002521941QQcmdZViewItemQQptZUK_T oysGames_ModelKits_ModelKits_JN?hash=item400002521 941&_trksid=p3286.c0.m14&_trkparms=72%3A1298%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318

[plumpcars]

Sadly thats a 5w Paul.....

[pauline als diner]

This guy's still got four showing available:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=370104045546

Steve said he's used him I think, and total should be less than $30 which is still only (!)about £20

have brought one of the kits from him waiting to find out the p&p cost since tuesday

[farncombe pop]

Sadly thats a 5w Paul.....
As i said it could get him started ;) chassis / engine / wheels, better than an empty table :D perhaps someone has just a spare body?
by the way i put up a link before for a rocking rods kit but no interest so i bought it !:p

[farncombe pop]

Thats the kit i got the other week....although not being built as per instructions:rolleyes:.......messing about with old parts to see whats gonna look better.....gasser methinks:D

FGNice :) mine's having a blown chevy dropped in ;):D:D may the best rockin rods win :p:p:D:D

[Fatguyz]

As i said it could get him started ;) chassis / engine / wheels, better than an empty table :D perhaps someone has just a spare body?
by the way i put up a link before for a rocking rods kit but no interest so i bought it !:p
thats the kit that my "now a 3 window" started life as....also got the 32 vicky as well..........loads of good bits in them BUT that 32 kit comes with the rear axle moulded into the floor pan and building it as it is shown on the box is not a "simple" job.

on a different tack....are we allowed to use metal components???????....i turned up a moon tank on the lathe at work (back at work for a week)

Paul, the RR kit is now being built by Wiggy....although she wants to modify it and shes never built a model kit before

FG

[pilgrim]

Okay, so who's started their build early?
Come on own up!


I might have 'offered up' some bits.:rolleyes:. Just to see if theyre gonna fit, like.;)

mind you, its at least given me the incentive to finish this:
http://img.photobucket.com/albums/v256/Morbius666/2008_10240044.jpg

God knows where its gonna go though!

[plumpcars]

Just to clarify. In the modified class you can modify/add /subtract parts made from anything under the sun.:)

[plumpcars]

The guy in the States is a proper hobby shop. I can only guess that you've caught him at a rather busy time.;)

I ordered some parts from him last week....didn't bother asking about the postage first but found it to be fair when the invoice came through.

[scottie]

is that the big "T"

scottie

[pilgrim]

is that the big "T"

scottie

yes. It is big. It does what it says on the box.:eek::D

[scottie]

ive still got the big scale monogram street rod T and 32 roadster needing rebuilds in the loft

for a rainy day



scottie

[rem]

Tried him , and ...




...same result :(

Really wanted to start with that kit as like Pauline I've not done one before , only got a day or two left before I'm away for Christmas so I'll keep trying til then ..

It took him (them!) about a week to get back, and then it was an estimate, so I would say just order one. Hopefully by then they will know how much Pauline's was and it will be the same - I think Steve said he'd had kits from them posted for about $15

[scottie]

im going to glasgow, there are 2 model shops, if i see any i will pick them up

scottie

[scottie]

went into both shops today with no luck,,


anyone needing ideas? couple of pice here

http://www.jalopyjournal.com/forum/showthread.php?t=318780


scottie

[sk8erdave]

i still havnt got one.

I've got my wheels, tyres, engine and suspension all sorted, but just need to get a car to put them on lol.

[WB54]

ordered my second kit from the states for $24, took just over a week to get to me, anyone short of a kit I'dj ust look on Ebay US at Buy It Now Auctions. Use an exchange rate of 1.48 or so and don't pay more than $30 inc the kit and shipping, should take a week maybe 2 to get to you.

[sk8erdave]

for some inspiration try these forums :)

http://cs.scaleautomag.com/scacs/forums/
http://automodelling.com/forum.php?id=2

[pauline als diner]

It took him (them!) about a week to get back, and then it was an estimate, so I would say just order one. Hopefully by then they will know how much Pauline's was and it will be the same - I think Steve said he'd had kits from them posted for about $15


he has just got back to me was $6.00 p&p and a extra $3.00 for insurance so total was $22.59 cant rmeber what it was in pounds

[Drakie]

Thats a good price for that, did you buy it!


he has just got back to me was $6.00 p&p and a extra $3.00 for insurance so total was $22.59 cant rmeber what it was in pounds

[the_hotrod_freak]

http://search.stores.ebay.co.uk/Quality-Hobby-Shop_1932-ford_W0QQfciZQ2d1QQfclZ3QQfsnZQ51ualityQ20HobbyQ20 ShopQQfsooZ1QQfsopZ1QQsaselZ221221173QQsofpZ0

us seller has 6 kits

[pauline als diner]

Thats a good price for that, did you buy it!

yes hoping it wont take long to come:D

[Drakie]

Nice one glad your sorted!


yes hoping it wont take long to come:D

[Drakie]

Well im sorted now got my 32 kit as an xmas present so i will open it up on the 1st and make a start on it!
If you havent got a kit yet dont panic as if you cant get 1 untill the build off has already started as thats one of the reasons it is being run for 2 months to make it fair time wise for the novice builders to have time to do it ( like me! ) Details of how to submit your build will be posted up after me steve and the NSRA have all had a chat.
You will be able to submit your model photo's/write up between March 1st - 7th.

I hope you all had a fantastic xmas day !!! have the baggy pants come out today due to all that food??!!

[jsf55]

No Baggy pants here, as plant maintenance has to go ahead .... and was it cold !
anyway, postie's been ....
http://inlinethumb31.webshots.com/43486/2254522260099641316S600x600Q85.jpg (http://good-times.webshots.com/photo/2254522260099641316vEyQHQ)

[Drakie]

Nice one mate! ready to rock an roll now eh fantastic were getting there now!


No Baggy pants here, as plant maintenance has to go ahead .... and was it cold !
anyway, postie's been ....
http://inlinethumb31.webshots.com/43486/2254522260099641316S600x600Q85.jpg (http://good-times.webshots.com/photo/2254522260099641316vEyQHQ)

[surfmonkey]

i`m itching to get started....got all my parts layed out on my drawing board...so much enthusiasm, that`ll be gone when theres glue and paint all over the place and the scale 8 inch chop doesn`t come out right:eek:

[Paul]

i`m itching to get started....got all my parts layed out on my drawing board...so much enthusiasm, that`ll be gone when theres glue and paint all over the place and the scale 8 inch chop doesn`t come out right:eek:


and you've lost a load of parts that Dobbie's eaten!!

[surfmonkey]

and you've lost a load of parts that Dobbie's eaten!!


he`s already tried

[Brizey]

With less than a day to go before those tubes of glue get fired up, I thought it may be a good to include a small shopping list of tools etc that the people that are new to model building may not already have. :)

1/ and the most obvious, GLUE.
Glue (cement) comes in 2 types. 1 type is the normal glue in a tube, which is probably easier to use for someone new to plastic kits.
The other type is Liquid Poly cement. Not quite so easy to use, it`s a watery liquid that comes in a small bottle that has a brush on the underside of the lid for applying it.... do not inhale. :):):D

2/ MODELLING KNIFE. Available from model/craft shops and some hardware stores. Use it for cutting parts off of the `tree` (or `sprue`) that the parts are attached to. Also used for trimming and tidying up the edges of parts once off of the tree, as some parts will have `rough` edges that stop them from fitting together properly. Trial fit all parts before gluing. Modeling knives are like scalpels, sharp and dangerous, so handle with care.

3/ TWEEZERS. For holding smaller parts, such as door handles, interior mirror, foot pedals etc while gluing and fitting. They save those fat fingers getting in the way. :)

4/ NAIL FILING BOARDS?. You girls know the ones.;)
Use these for trimming and cleaning up rough edges on parts for a better fit.

5/ TOOTH PICKS. When gluing smaller parts, use a small drop of glue on the tip of a tooth pick to apply it to the part to be glued, rather than smothering the part in a large glob of glue and have it stick to your fingers and anything else you come into contact with.:rolleyes::D

6/ ELASTIC BANDS & CLOTHES PEGS. For holding parts together after gluing.

7/ PAINT & BRUSHES. Model paints are available from model/craft shops as are brushes of varying sizes. Lots of model shops also stock TAMIYA cans of spray paint for models. Some parts need painting before assembly, so plan ahead.

The rest (like the real thing) is down to you and your imagination!.
Take your time, enjoy yourselves and have fun...

[jsf55]

Couple of things to add to Brians list
Decent light, the normal light in the middle of the room ain't going to cut it !
A recent set of specs, if you were them, or if you still struggle get one of those nice large lit magnifying glass
And finally .... put some paper down ! or even handier work in a largish box and cut one of the four sides out, this can then be lifted and stored out of the way of tiny hands and mouths :eek:

[farncombe pop]

And don't forget that cutting mat! damage the table once and she will never let you forget it :o:D

[pilgrim]

hmm. Nobody's mentioned patience yet! Its invaluable!:D

[plumpcars]

Ratty....Get one from the American guy on Ebay posted above. pauline used him. His postage is fair and stuff I ordered from him got here in double quick time. It's not too late......

Could anybody who has not got a kit yet please pm me so I can get a list together.

[farncombe pop]

Ratty i've got three coming from the states :eek: well at $38 the lot including shipping they were cheap ;):) so i will have a spare ;);)

[Fatguyz]

I've got one of those little stands with arms, crocodile clips and a magnifier on it - £4.99 from hobbeycraft - very useful - also a new airbrush:rolleyes:

old nail files, dremel and blu tac are also very useful.

FG:cool:

[WB54]

for anybody thinking about chopping their top, a modelling razor saw is what you want, but a fine toothed blade in a junior hacksaw will do the job. First model I chopped I did with my mums bread knife ! Mum wasn't too happy.

In terms of lining up the roof. The rear pillars are fine, fronts need to bend inwards and backwards slightly to line up. Re-scribe the mouldings and drip rails, file the cut smooth then add a little skim of filler. P38 is too coarse for models, spot putty like Squadren Green or Revell's gear in a tube are best for slight imperfections.

[Drakie]

For anyone that may want a bit of extra help on tips click on this link and save it in favorites
http://www.automodelling.com/forum.php?id=2&fid=49
this is full of tips for ya!

[hotrodhooligan666]

Just read these posts, and if I can get a kit soonish, I'll join in.
Any ideas, at this late hour??

Its been years since I built anything, so is there a '****ed it up' class??

Hotrodhooligan666
Paul Harris

[jsf55]

2 in ebay canada, cost me just over £20 to get mine here, ebay 180302410929

[Drakie]

If you give the model shop a call i posted up he is gettin some in very soon ! sorry no ****ed it up class on this one but if you want to join in just post your forum username and real name an ya in!
Happy 2009!


Just read these posts, and if I can get a kit soonish, I'll join in.
Any ideas, at this late hour??

Its been years since I built anything, so is there a '****ed it up' class??

Hotrodhooligan666
Paul Harris

[plumpcars]

Ok a full prize list will be posted soon but just wanted to say thank you to Hot Rod Widow for adding extra prizes to an already interesting mix. Very much appreciated! :):)

[Drakie]

Ok a full prize list will be posted soon but just wanted to say thank you to Hot Rod Widow for adding extra prizes to an already interesting mix. Very much appreciated! :):)
Many Thankyou for your prize offer Hot Rod Widow a fantastic offer like steve says we have some interested prizes that you will all be very pleased about! A Huge Thankyou goes out to everyone that has donated prizes:):):)

[Matt100e]

Right, managed to sort myself a kit out today. So finally im in too

Matt100e

Matt Chambers

[Drakie]

Good on ya matt welcome to the build off! Now GET BUILDING!!!!!!!!
by the way Happy new year! lol

[beatermat]

cant believe iv only just seen the threads for this comp today!:eek:
i know its past the start date but is there anychance i can join in please?


beatermat=
mat browning
modified class

[Glyn]

Glyn Thomas to be added on the list.

[plumpcars]

Please guys....get building. You're all welcome!:):)