4 bar brackets available soon. Trade

[Paul G]

I've been asked about 4 bar mounts a lot recently so I'm going to get a few of these cut in the new year . I'll sort out prices once the laser people have sobered up.

http://usera.ImageCave.com/Paul_G/Whengparts/4%20Bar%20Index-Model_0001%20(877%20x%20620).jpg

Sorry about the quality of the pic , it's been converted from one format to another & then another .

Just some food for thought , I'm off to move my beer out of the Garage & into the fridge to warm it up a bit . have a good one people :D

[gettinonabitmore]

Let me know dude, need some STD4BSt's and possibly some CHS4B's....

Have a good one...!!!


Can you do the ASM's to fit 4x2 box???

[THE VIKING]

Hi there Paul yes please you now know what I want dont forget the engine plates. :)

[mikecouch]

Hi Paul,

Can you put me down for some STD4BSt's and ASM's

thanks mate

best wishes for the new year

mike

[bigbadbaldlee]

I've been meaning to ring you this week about some four bar brackets.

Fancy that.

[Paul G]

I can adjust them to fit your box Guy , no problem.

What diameter axle tubes are you guys using?

[mikecouch]

Paul,
ill have to measure mine using a chevy 10 bolt off a nova ..

[gettinonabitmore]

Approx 60mm for me please, can't tell for deffo because me axle is under a load of other junk...!!

mk2 Escort if you have one lying around...!!!

[mikecouch]

does anyone know the dia of the chevy 10 bolt axle tubes ??

[bigbadbaldlee]

does anyone know the dia of the chevy 10 bolt axle tubes ??

Mines 3" (so's my axle phnarr) but I don't know if they're all the same.

[Paul G]

Approx 60mm for me please, can't tell for deffo because me axle is under a load of other junk...!!

mk2 Escort if you have one lying around...!!!

I do , but it has a mk2 Escort bolted to it.

[gettinonabitmore]

I do , but it has a mk2 Escort bolted to it.


Will check over the weekend....

Any rough ideas on cost???

;)

[Paul G]

Not until the laser guys get back to work on Monday

[gettinonabitmore]

Lasery gits...!!!

[Paul G]

Guy , I only have 2.5" , I assume yours is the same.

[gettinonabitmore]

Guy , I only have 2.5" , I assume yours is the same.


Nope, mine is much bigger, but I will measure the axle tomorrow....

Badumch...!!!

:D

[Paul G]

Ok , I got some prices.
a set of 4 axle plates (any version) works out at £75. axle plates & 4 chassis plates comes to £110. axle plates , 4 chassis plates & 4 LSM works out at £125.

Mark , your engine plates will be £20 the pair.


Ignore that - got some more prices through that I had given up on!

Axle or chassis plates - £40 per set of 4 regardless of which type.
Axle shock mount bracket (ASM) - £25 per set of 4
Lower shock mount (LSM) - £15 per set of 4


Engine plates still £20 the pair

[gettinonabitmore]

STD4BSt for me please, 60mm (as you said..!!)

When do you need the dosh??

How quick for the brackets??

Will make my own chassis ones, because yours (above in pics) will not work, as they will be fitted to the 'drop' on the rear chassis, see pic:

http://usera.ImageCave.com/yella_zodi/pop/stuff033.jpg

They will be welded to the diagonal section...????

[gettinonabitmore]

Um, holes for M12 bolts please...??!!!

[Paul G]

Awkward basperson.

I'll get them ordered in the next day or 2 (when I've altered all the hole sizes) , should have them for the middle of next week.

[gettinonabitmore]

Just to reiterate, only the axle brackets please, I will have to fettle some for the chassis myself...:eek: