PDA

View Full Version : Garage Clear Out



chaley
22-01-09, 11:40 AM
It's clear out time again, I've ended up with a load of my mates (hello Davey) bits in my garage and now he says sell, sell, sell, so here goes.

4 x 13x6jx19 ford rs 4 spoke wheels off a mark II capri, powder coated satin black, inc 2 newish 175/70/13 tyres, ideal for that south london look! £100

1x pinto cam, burton fast road injection, usa made marked up EP26, fitted, but never run, inc new valve springs and belt wheel (no followers Kev all ready has those) £30 on Sold to Kev.

1x type 9 5 speed box ( in Hants) 60 quid

1x weber 32 dgav carb off 2.0 pinto 30 quid

1x weber 32/36 dgav carb off 2.0 pinto 30 quid

1x full pinto gasket set inc a few extras (3 head gaskets and more) 20 quid

1x lumenition electric ignition module for ford crossflow ( box only no rota arm or sensor) 30 quid

1x pinto injection dizzy ( bosch) 5 quid

3x girlin master cylinders 5/8 (anglia? need rebuild) 5 quid each

1x girlin master cylinder 5/8 large sized pot (gt cortina? for rebuild) 10 quid

Unless stated the bits are in Norwich,
Should be able to drag all but the box to swap meet if that helps.
Please reply there or PM me,
Thanks for looking, I need my garage back!

Chaley

Sorry the pound sign disappeared half way though writing the add?

kapri
22-01-09, 12:22 PM
Is Davey still about, haven't seen him on here for ages ? He did me a good deal on a Pinto a few years back,much appreciated.

Can you put me down for the cam please ? PM me with posted price etc ?

chaley
22-01-09, 01:24 PM
Kev,
Dave is now a mad keen cyclist road racer, and has given up the evils of the petrol engine! If you take him out in the pos we may get him back!The cam is the one that you gave him back from that engine, he's coming up in a week or 2 and can take it back to Liss if that's any help? If you want it sooner I can box it and weight it for you. Or I can drop it at the swap meet if there's no rush.
Chaley

kapri
22-01-09, 01:27 PM
No rush, him bringing back to Liss would be fine. I'll take the POS up to pick it up ;) .Just mail me once it's there cos I'll have forgotten all about it by then .:(

chaley
22-01-09, 01:31 PM
Kev,
I'll put it in a bag with your name on it, just pay Dave when you see him.
Chaley

eeb43
22-01-09, 05:06 PM
can you tell me what part no is on the wheels please it will start with either a 7 or an 8

chaley
22-01-09, 06:37 PM
Mark,
I'll go and have a look in abit, if I can find my torch.
Chaley

chaley
22-01-09, 07:15 PM
Ok Mark here goes,

2 are marked up with a 7 inside a O then 86 in O and then H-81E8-AA

1 has 7 in O then 79 in O then 11073

and the last 10 in O and 84 in O and H-81E8-AA

Any good to you?

We can deal as I'm sure you'll have some bits I need.
Chaley

chaley
09-02-09, 07:47 AM
Kev, the cam is now in liss! pm on it's way,
and bump.
Chaley