fuel line question

[matt]

In the drag racing yearbook, it says " All non-OEM fuel lines / must be metallic, steel-braided or FIA accepted "woven pushlock" " , What options do i have in metallic ? steel, copper ,ali ? Whats the best and where would stock it? Outlet from tank is 8mm , Cheers Matt

[langysrodshop]

You can use hardline in Steel or Ally or Kunifer but i wouldn't use Copper. What size lines are you running.

I can help with all you need, PM me or call 07836 244483

[WB54]

don't use steel, only stainless, steel corrodes and creates a milky emulsion over time which goes through your carb, learn't the hard way, spend half a season chasing ignition problems when it was metering block gummed up

[Adam]

You can buy the correct ally fuel line in 3/8" or 1/2" 25 foot long rolls. The NHRA rule book states that a maximum of 12" can be rubber hose but it's best to get the correct AN fittings and use braided steel.

[langysrodshop]

Phil i should said coated steel.



don't use steel, only stainless, steel corrodes and creates a milky emulsion over time which goes through your carb, learn't the hard way, spend half a season chasing ignition problems when it was metering block gummed up