door wiring sleeves

[koolwagon]

Hi, Does any one know where i can get some nice thick wiring sleeves to go in my door,I have 4 thick wires going through it(door solenoid (10 gauge) and 3 for the power windows)i have some small rubber type ones but they are not big enough to get the wires through.

[kapri]

Have a peer inside modern car door shuts, all sorts in most upmarket stuff to get though, power mirrors ,heated mirrors, electric windows, central door locking, indicators in mirrors etc then off to the local dealer :)

[koolwagon]

Thanks Kev,Im after something old looking to go in the 59 door that doesnt look too modern

[kapri]

Normally just a convuluted rubber tube even on modern stuff. The other way to go is with those in door jamb things that only make contact when the doors shuts and have no tube wires etc showing when the doors open??

[57ford]

Normally just a convuluted rubber tube even on modern stuff. The other way to go is with those in door jamb things that only make contact when the doors shuts and have no tube wires etc showing when the doors open??


Shooters.

[kapri]

Tequila slammers ?

[Smithy]

On some cars I have used petrol hose with the wires inside, with a hole in the door shut with a grommet. Making sure the grommet in the door shut is a snug fit on the hose. Then another hole in the door with a grommet, which should be slightly bigger than the hose, allowing the hose to slide through the door.

[chevy1]

We have all the different sizes of these in stock if thats what your looking for

http://cgi.ebay.co.uk/1Pr-Spring-Load-Elect-4-WIRE-JAMB-TACH-91040024_W0QQitemZ220283152669QQihZ012QQcategoryZ1 00952QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153. l1262?_trksid=p1742.m153.l1262

Jamie