Diff wanted

[WRECKER]

Looking for a diff to fit a sherpa casing such as a westminister or simular that will fit with 3.54-1 gears or taller, that will give it longer legs on the motorway thanks

[eeb43]

4.1?

[WRECKER]

would like something a bit taller if I could find it. got to get underneth an finf out whats there now been told 4.85 or 5.11

[WRECKER]

bttt

[WRECKER]

bump

[Paul B]

I fitted Westminster gears into my Sherpa housing. I was told they fit straight in, but after i bought the diff off Ebay I found the axles had different splines, so I pulled apart the Westy gears and built them together with the Sherpa spline hub things. I also had to remove some curved shims from the planet gears to get them in, but it all worked out eventually.

Came out at 3.9:1, which was far better than the 4.9:1 I started with.

[WRECKER]

Hi Paul from what I've heard there are 2 type of spline for the westy 10 and 27 but I toyally agree with what you said swapping out the planets is the way to go if needed. I hve heard of some sherpa's having 3.54 gears but I'll find a diff one day. Plan B is the
P5b axle swap they are the same width and the right gears but hey I'm 25 years out of date.... and Lazy. LOL

[wolselliac]

Looking for a diff to fit a sherpa casing such as a westminister or simular that will fit with 3.54-1 gears or taller, that will give it longer legs on the motorway thanks

Hi

You won't find anything taller than 3.54 .
Others available (c. 1968) 1:3.77, and 1:3.9.

Happy seaching!!!!

Marek