Wanted. Wheels redrilled

[willyscoop]

I need a pair of 10x15 slot mags redrilled, currently 5-stud ford 4 1/5'' pcd, i want them redrilled to 5-stud 5''pcd, rover sd1 etc. Or has anyone got a pair of 10x15 slot mags 5x5? Phone alan 07956122483. Cheers.

[blobby]

Alan,any engineering shop would do that,of coarse you'd have to remove the tyres first,it would probably cost you about £1-£2 per hole.

[Art]

I need a pair of 10x15 slot mags redrilled, currently 5-stud ford 4 1/5'' pcd, i want them redrilled to 5-stud 5''pcd, rover sd1 etc. Or has anyone got a pair of 10x15 slot mags 5x5? Phone alan 07956122483. Cheers.

As the ford wheels are ready available,would it not be better to have the shafts redrilled to the ford stud pattern, should you need a change of wheels in the future. Brian

[mike noble]

no no no . sell me the wheels:):):):)

[Art]

no no no . sell me the wheels:):):):)


What ya after??

[willyscoop]

Ok guys. Unfortuneatly the rear of the wheels were i want them redrilled is not flat! The original holes could be elongated, but i,m not sure about that? The rover sd1 halfshafts are a real pain to alter. Does anyone know if they made slot mags back in the day in a 5x5 pcd? If i could get a pair of 10x15 in 5x5, i would sell them. Many thanks guys. Alan.

[Art]

Ok guys. Unfortuneatly the rear of the wheels were i want them redrilled is not flat! The original holes could be elongated, but i,m not sure about that? The rover sd1 halfshafts are a real pain to alter. Does anyone know if they made slot mags back in the day in a 5x5 pcd? If i could get a pair of 10x15 in 5x5, i would sell them. Many thanks guys. Alan.

As always I only sold these on r&s about 3 months ago, which were a 5" pcd, Thanks Brian

http://imagehosting.rodsnsods.co.uk/6144c069b6fc01ce.jpg

[willyscoop]

At least i know they did make them with 5''pcd! What backspacing did they have? My ford one,s are 3 1/2''. Cheers. Alan.

[mike noble]

What ya after??
some kind of slot mag, bout 10x15..... what ya got?

[Happydaze]

Does anyone know if they made slot mags back in the day in a 5x5 pcd.


5 on 5 were the hot ticket as the toughest available axles of the day (Olds/Pontiac i think) were 5 on 5 - so the wheels you haven't yet got might have seen FED duty :cool:. But you'll probably be looking at 10 * 16, or wider.

US ebay should sort you.

Bingo, with slicks

http://cgi.ebay.com/ebaymotors/Rare-Ansen-16x11-Goodyear-Bluestreaks-GASSER-Dragster-/120721091577?pt=Motors_Car_Truck_Parts_Accessories&hash=item1c1b89abf9

Bingo 2, the real deal

http://cgi.ebay.com/ebaymotors/16-x-13-HALIBRAND-MAGNESIUM-WHEELS-GASSER-RAT-ROD-DRAG-/290557990996?pt=Motors_Car_Truck_Parts_Accessories&hash=item43a69b1854

But if you wanna play, ya gotta pay.

Chris

[MisteR Tee]

Alan,any engineering shop would do that,of coarse you'd have to remove the tyres first,it would probably cost you about £1-£2 per hole.

You wish!! Last lot I had done, probably 12 years ago cost near on £80 for a pair & that was a trade price. To do them properly requires a CNC mill & it's the setting up that takes the time & consequently the cost. Most shops prefer medium to long runs of work, the hassle of all that work for just 2 or even 4 wheels tends to put off most workshops.

[taxirod]

Hi Maurice, have you tried talking to Rob Dawe, near Chatham?
01634 830679 07504 500349. He unilugged a pair of slot mags for me a couple of years back and did a good job.

(just realized - its not Maurice asking)