carlos
28-02-16, 08:59 PM
Pictures on the other channel.
Sbc blower camshaft and lifters, fire up time only £100.......sold
Fordson spindles and kingpins £50
A.r.e. Wheel centres £20 for 4
1/2 ton block and tackle £20
Ford pop front door Bakelite interior trim, one perfect other cracked but easy repair £40
Remove before flight tag £10
Sbc long water pump very little use £30
New stock fuel pump £25
Stainless 4 bars £100
4 off steel interior window surrounds from..........Unknown £60 set
28/29 model A fibreglass visor £40
Totrod fuel tank £10
Blue flake steering wheel 13" dia moggy centre £30................sold
Sbc finned rocker covers inline holes new in the box £100
Billet aerospace 4 pot calipers, accepts wilwoods dynalite pads £150............sold
Adjustable axle bars with lh&rh threads £25..........sold
Billet plug wire separators for sbc £35.............sold
Wheelie bar £25
Strange Ford 9"wheel bearings for 1.562 shafts £50
Pair of 9" 28 spline shafts small bearing to make centred pinion 37" wide axle £75
Model A/B front frame horns £35
Model B rear frame rail ends £20
Ford pop spindles with chevy stud pattern hubs £40............sold
Ford 9" axle case, tubes, billet ends and 31 spline big bearing shafts to make centred pinion 47" wide axle £400
Ford 9" axle with 3:0:1 LSD 28 spline 46" wide with new discs £700
Fibreglass wheel tubs, will take 34" tall slick. £100
All of these quality wares will be at the swap meet.
Would consider p/X on a 350 sbc short or long block w.h.y.
Sbc blower camshaft and lifters, fire up time only £100.......sold
Fordson spindles and kingpins £50
A.r.e. Wheel centres £20 for 4
1/2 ton block and tackle £20
Ford pop front door Bakelite interior trim, one perfect other cracked but easy repair £40
Remove before flight tag £10
Sbc long water pump very little use £30
New stock fuel pump £25
Stainless 4 bars £100
4 off steel interior window surrounds from..........Unknown £60 set
28/29 model A fibreglass visor £40
Totrod fuel tank £10
Blue flake steering wheel 13" dia moggy centre £30................sold
Sbc finned rocker covers inline holes new in the box £100
Billet aerospace 4 pot calipers, accepts wilwoods dynalite pads £150............sold
Adjustable axle bars with lh&rh threads £25..........sold
Billet plug wire separators for sbc £35.............sold
Wheelie bar £25
Strange Ford 9"wheel bearings for 1.562 shafts £50
Pair of 9" 28 spline shafts small bearing to make centred pinion 37" wide axle £75
Model A/B front frame horns £35
Model B rear frame rail ends £20
Ford pop spindles with chevy stud pattern hubs £40............sold
Ford 9" axle case, tubes, billet ends and 31 spline big bearing shafts to make centred pinion 47" wide axle £400
Ford 9" axle with 3:0:1 LSD 28 spline 46" wide with new discs £700
Fibreglass wheel tubs, will take 34" tall slick. £100
All of these quality wares will be at the swap meet.
Would consider p/X on a 350 sbc short or long block w.h.y.