Various shiny bits that you'll like

[andy fadster]

Reducing my ever increasing stock to make way for more stock I'll probably never use...

Here goes.

Gasser wheels potentially sold
Hoosiers sold
Edelbrocks sold.jpg[/IMG]

1 off Holley 750 carb. P80 R50 1516. Again, used for about 50 miles but on my shelf for about 3 years so a bit dusty. £100
http://i36.photobucket.com/albums/e49/andyfadster/DSCF0011.jpg

1 off Davies Craig Electric water pump 110 ltrs / min model EWP110. £120
http://i36.photobucket.com/albums/e49/andyfadster/DSCF0012.jpg

1 pair of Hairpins. Sold to Gary

1 off 1933/34 grille shell. Sold to the lovely Mr Pepper.

1 off Shotgun Scoop. Radical scoop on any rod. Needs a polish and some filters. Got base plates. SOLD TO THE MAN ROUND THE CORNER

1 pair of radir tri ribs. Sold to the raddist rod shop in the county, Mr Lang.

1 pair of O'Brien truckers front buick type brakes. Sold to Pez

1 pair of Air Flow Research ali heads for SBC. Check out the website, airflowresearch.com and look up the AFR SP227 heads. Really pukka piece of kit. Missing some valve collets but only need a clean up. Full 3 valve job done and only ran for 1 hour. Jezel roller rockers come with the heads but free of charge cos of some damage. These are the "spread port" heads and won't suit your normal headers. Now yours for £200....no offers please at this price.

http://i36.photobucket.com/albums/e49/andyfadster/DSCF0008a.jpg

1 Superbell axle. Sold to Gary

1 off Raleigh Runabout. Sold to Mark EEB43

Ford 9" axle. Now for sale again !! £200 please. PM me for details.

Thanks to all who have bought various bits and pieces.

I will be adding more bits over the next few days.

Thanks for your interest and to the NSRA for the ad.

[Dusty]

Hi Andy, just sent you a PM. I asked for your location as it wasn't in your profile, but I've noticed that it's in the ad header.

[eeb43]

interested in the honda but where are you?

[BRIT DIGGER]

andy, put me down for the raliegh runabout moped.

cheers......................... and nice doing business with you. X.

[andy fadster]

andy, put me down for the raliegh runabout moped.

cheers......................... and nice doing business with you. X.


Sold !! To the man with the big red truck.......

[andy fadster]

interested in the honda but where are you?

? I'm in manchester, but haven't got a honda....

[redoxide]

Andy, is the 9 inch one with the small bearing amd 10 inch back plates.. ? I am very interested in it but need to get down the other shed and have a quick measure.. Would it be OK to reserve it for few hours till I get some sizes... ?? ( bit cheeky but woth a try) :) will give yo an answer later tonight but right now the wife is hollerin its time for tea.. dont want to miss it by 10 m ins,, Cheers..

[Dusty]

Hi Andy, did you get my PM? Cheers Dusty

[andy fadster]

Ian, Not sure about the bearings mate but I'll check tomorrow. Its yours til then. Dusty, not got your PM, what do you need ?

[andy fadster]

Ian,
Back plates are 12", but it looks like the small bearing one. Is there an easy way to tell, I'm not real familiar with axles.

[Dusty]

Ian, Not sure about the bearings mate but I'll check tomorrow. Its yours til then. Dusty, not got your PM, what do you need ?
I put an offer on the Gasser wheels Andy. A PM should show on the top right of the screen...it doesn't go to your personal e mail account (as I found out yesterday) Cheers Dusty

[twolanes]

Hi Andy, have pm,d you. Dave.

[BRIT DIGGER]

Sold !! To the man with the big red truck.......

cheers mate.
it is taxed and tested isnt it......

[eeb43]

sorry i meant the raleigh runabout

[BRIT DIGGER]

sorry i meant the raleigh runabout

to be fair then i will give you the chance to buy it........................

no pressure as ill have it anyway.. fair?

[andy fadster]

to be fair then i will give you the chance to buy it........................

no pressure as ill have it anyway.. fair?

thanks for that Sid. Mark, over to you...

[langysrodshop]

Andy i would like the radirs if you still have them.

[randrhotrodimports]

Well done Steve, a bargain indeed. You cruising up to the AGM with us lot next week?
Russ

[redoxide]

Andy wont mess yah, will take the axle .. should be able to do something with it .. measured up and width would be fine with the skinny 6s, you have mail..

wish I never ummed and ahhed on the radirs though :( bargain they were .. nice buy

er re mail I think I sent it to 39 coupe by mistake LOL... you have a pm then...sine there is no e mail link.

[Dusty]

In case you miss my PM reply, I'll pass on the wheels Andy. Thanks for your time.

[andy fadster]

In case you miss my PM reply, I'll pass on the wheels Andy. Thanks for your time.


No prbs dusty, I just think they are cheap enough. To all the rest, thansks for your interest, nearly sold it all except the hairpins, which I may hang on to....or maybe not....giggle giggle.

[eeb43]

thanks sid, i would like the raleigh please andy can i send you a cheque for it and arrange collection at a later date?

[langysrodshop]

Thought i would put them on my trailer Russ, If i can shake off this virus i will.



Well done Steve, a bargain indeed. You cruising up to the AGM with us lot next week?
Russ

[BRIT DIGGER]

thanks sid, i would like the raleigh please andy can i send you a cheque for it and arrange collection at a later date?

only being fair mark.

hopefully what goes around..........................etc............

[andy fadster]

Sid, Very gracious of you. I'll cut you a great deal on the Dutton mate.

[redoxide]

andy need your address to send payment.. cheers for noo..

[twolanes]

andy need your address to send payment.. cheers for noo..
same here mate.

[redoxide]

c'mon andy were all waitying to send you dosh... geez an address.. :)

[andy fadster]

Think I've sent everybody who buying something a pm. If I've missed you give me a shout,
Andy

[eeb43]

no pm here

[Hot Rod Widow]

no pm here
you have to make sure you have "adjusted" your status in your profile bit to accepting pm's.. I found that out when I didnt receive those that said they sent me, sorry if you already know that....

[Joe_G]

Are the ETs sold?? Are they the one piece ones or two piece welded ones? Oh and what is the back space on them.
Cheers
Joe

[andy fadster]

Just measured them and they have a one and three quarter inch back space. The wheels are one piece and come as cast with a polished outer rim.

[V8 100E]

is this the same t that goes to the american automags cruise ? wots goin on have you broken it up as its the dogs danglies ??

[andy fadster]

No Dave, the T isn't affected by the downsizing. I was building a 33 pick up but decided it wasn't for me so just getting rid of some of those bits and spare bits from the T. The T is getting a blower nitrous kit, new cam and comp altered roll cage for next season so it should look even wilder !!

[lancelot link]

Andy ... in Cyprus until Wednesday will organise collection and payment upon my return .....hope thats ok ?

[andy fadster]

Yep, no problems with that mate, have a good holiday and speak when you return.
Andy

[andy fadster]

BTT....if thats OK ?

[twolanes]

Andy i picked up the hoosiers from Ratty today. They are in better nick than i was expecting, thanks very much mate.

[andy fadster]

Well I think its always better to be pleasantly surprised than unexpectedly disappointed. Glad you're pleased and thanks for buying them.

[lancelot link]

Andy , back now ..... can you pm me your address details again please?
Thankyou

[FH 49]

Hello, I know you have had these posted for a while, but do you stil have the pair of Hoosiers available?
Thank, Ian.

[FH 49]

I know you have had these items posted for a while, but do you still have the pair of Hoosiers available?

Many thanks, Ian.

[FH 49]

Sorry just scrolled through to find that you have sold them, bit of a Blonde moment! missed a couple of pages!

[Dave'29Ford]

You should have a PM from me Andy.
Dave Mc

[andy fadster]

New price on the heads.