Printable View
These ones Steve;
http://www.rallydesign.co.uk/product...oducts_id=4048 I'll call you later.
For anyone that's interested I found out today the Feltham Radiators have re-started with one of the guys working for them and are now called GT Radiator Services in Shepperton. Call Lee on 01932 568 816.
Cheers Mark....duly noted :thumbs_up_smiley:...Quote:
Originally Posted by Blackpopracing
Quote:
Originally Posted by Blackpopracing
Ah right, they have an inverted flare at the bottom yes ? You can just use a regular 3/8"-24 tube nut then.
Not sure till they arrive Steve - I'll call you tomorrow to discuss options.
New MC's have now arrived with fittings to re-plumb them. Just need to work out if I need more stainless tube or if I can get away with what I have spare.
I've made new bracketry for the new reservoirs so they are now fitted with more room above for easier filling too as they have much smaller mountings - bit of a positive result there.
Fitted the speakers in the rear panels while I am waiting for parts, and spent a not so happy 2 hours removing all the roof dash tracing a wiring fault to one of them - turns out a wire had pulled out of a crimp connector pin before I crimped it on tight.
Still waiting on trimmer getting back to me with prices & confirmation of delivery.
Bit pi55ed off with my header coatings - zinc flame spray coated - was promised faithfully it would be ok (wanted hot aluminium flame spray) but it has burnt off in only 25 minutes of running :( £350 wasted unless I can get the guy to re-do them properly, but I have lost faith in him now.
Hot Ali spray near me mark is around £100 for a pair of headers.
Cheers John, might get details off you for that.
here you go mark.
RFI 01920 822730
ask for steve if he is around.
£350 for zinc sprayed !!! You were proper done MarkQuote:
Originally Posted by Blackpopracing
come to think of it mark. and as steve said above. RFI will shot blast a wheel and zinc coat it for around £15. so £350 for your headers seems very rich.
It was Elliot Steve?? though it seemed a bit much?Quote:
Originally Posted by Steve Lang
He has got dearer but that's taking the pi$$ !!!Quote:
Originally Posted by Blackpopracing
Yeah, I'm a bit ****ed about it as he's not bothered to reply to my messages - I want my money back.
Turn your speakers up :D
https://www.youtube.com/watch?v=xVJV...ature=youtu.be
Sounds really strong Mark
Thank you for that coz its put a big smile on my face! It sounds great!
Nice one Mark .....:thumbs_up_smiley:
Great stuff :)
Very nice,:thumbs_up_smiley:
Cheers guys, tis good fun to run :)
Ran it up through the gears tonight, had 140mph on the clock at 4000 rpm :D (need to calibrate speedo I think)
I got the brake lines finished tonight too, half bled now with no obvious leaks - ran out of fluid so will finish them tomorrow.
New reservoirs fitted - bit more room with these ones which is nice;
http://imagehosting.rodsnsods.co.uk/3453fe53e3ed05e.jpg
Brake lines now completed;
http://imagehosting.rodsnsods.co.uk/3453fe53e5bbb7e.jpg