New " TRACK MASTER" series engines SBC 355 to 383 cid / 400 to 600+ BHP / turn key

[Dr.Dee]

TRADE:
New TRACK MASTER series SBC engines 355 to 383 cid 400 to 600+ BHP for street & track use , 100% turn key , dyno tested & tuned .

Quick spec:
GM 4 bolt main blocks full CNC machined studded , brass frosts , oil mods done , E/W 4340 crank LITE WEIGHT @ 47 lbs / E/W 4340 rods I & H & A beams ARP cap screw bolts , KB forged pistons 1/16 rings E/W plasma moly rings file fit , CL-77 H race bearings.
Custom gind Comp Cams roller cam , Morel USA roller lifters , Rollmaster true roller chain set.
Heads E/W 2010 design alum heads full CNC machined 200 to 215 cc runners 2.02 & 1.60 SS valves 1.440 dual roller springs , 10 degree locks , Viton seals , 7/16 studs , adjustable guide plates.
MLS head gaskets . Rockers are full roller Warhammer alum or PRW steel roller rockers.
Intakes are Air Gap or Hurrincane or Super Shoot Out +
Ignition Outlaw billet dizzy coil E/W E-coil 60,000 volt wires Mega-Fire 8.5 mm or MSD Super Conductor
8.5 mm wire looms R & M linner
Oil pan is Hamburger USA 6 & 7 QT with crank scraper & windage tray & trap doors , pump Melling HV 55
with ARP pump drive.
Water pump E/W HV alum , pulleys alum altin 100 amp chrome , brackets custom billet alum.
Carb QFT USA Slayer or race carbs , custom dual chrome fuel line / Marshall liquid fuel pressure gauge , SS braided fuel lines, fuel pump Big End 110 GPH chrome ARP pump rod.
All covers custom alum polished , billet PCV valve , K&N breather , air filter custom alum oval.
Engines dyno'd & tuned on 93 US octane fuel

PRICES start @ 5100 GBP dyno'd turn key
e-mail fastcoauto@aol.com Cheers Daryl

[Dr.Dee]

Video of TRACK MASTER engine on the dyno Apr 25 / 2013.... results 483 BHP @ 5700 RPM fuel used on dyno US 93 octane pump gas .... total timing @ 36 degrees all in @ 3200 RPM
CLICK ONTO PHOTO TO SEE VIDEO: