You might have seen it in the gasser mag. Well I've started build the bed. Phase one is done all cut and ready to stick together.
Sent from my SM-G990B using NSRA mobile app
You might have seen it in the gasser mag. Well I've started build the bed. Phase one is done all cut and ready to stick together.
Sent from my SM-G990B using NSRA mobile app
Real steel
Nice, be keeping Tom busy no doubt !
This is my project John. I need this done to move the Dorset around.
Real steel
Righto I'm sure it'll be done in time![]()
Looking good John, hope there's still no plans to paint the cab mate.
Cheers Tim W
Sent from my M2103K19G using NSRA mobile app
Only matt lacquer. I've tilted the bed today. I going to have a think about it whether to drop it an inch or two.
Sent from my SM-G990B using NSRA mobile app
Real steel
Sweet.
Cheers Tim W
Sent from my M2103K19G using NSRA mobile app
I had an hour to spend today. So I cut all the uprights for the main rails. More tomorrow.
Sent from my SM-G990B using NSRA mobile app
Real steel
Nice one, thats a whole heap of welding there!
Thanks for showing us what you're doing.
I may live in East London, I may have a number plate that reads "Chopt",
but I do NOT use 6" wheel spacers!
YouTube - Toms Custom Shop
https://www.youtube.com/channel/UCro...hD-y5NuJyZAA2Q
8.43 @ 157 - Rail
10.37 @ 128 - Doors
Most of the steel cupboards are all cut up. Was going to do more today. I started to feel very sick and freezing cold
I got to the hotel about 3pm. Fell asleep, then woke up just after
9.pm
Then Was violently sick for a while
Felling good now
Sent from my SM-G990B using NSRA mobile app
Real steel
Wasn't any galv in those cupboards ?
Quick update. Chassis and running gear all done
9" axle is fully rebuilt with 4.11 gears
New propshaft from Bailey Morris. Chassis all painted. Just got to plumb the rear axle brakes in. Here is a few pictures. Can't beat a lucozade.
Sent from my SM-G990B using NSRA mobile app
Real steel
Looking good John.
Cheers Tim W
Sent from my M2103K19G using NSRA mobile app
Front panels on today. Soon be wiring it up.
Sent from my SM-G990B using NSRA mobile app
Real steel
Flying along![]()
that'll be a really cool combo with the race car on the back mate
neil.
Going to look the bollies when it's done John.
Cheers Tim W
Sent from my M2103K19G using NSRA mobile app
Well, guys, better update. Due to Tom looking to have the Dorset ready for the hrd, it put the pressure on me.. anyway, it's been all systems go recently. I can say. The main steel work on the bed is done. I've had the ali sheets on and the winch..just got to do the side cupboards now. All that's left to do is.
Fit the screen.
Make exhaust.
Wire it up as I've been let down, unfortunately.
Fit the ali floor and winch.
Make the ramps
Sent from my SM-G990B using NSRA mobile app
Real steel