I have a volvo rear end on my 34 ford, whats the pcd for these axles? I seem to get 5x105 but been told they are normally 5x108? Is this correct?? Am i measuring the pcd wrong?
Sent from my SM-S928B using NSRA mobile app
I have a volvo rear end on my 34 ford, whats the pcd for these axles? I seem to get 5x105 but been told they are normally 5x108? Is this correct?? Am i measuring the pcd wrong?
Sent from my SM-S928B using NSRA mobile app
Measure from the centre one stud to the centre of the next stud and divide by 0.58778
5 x 4.25 or 4-1/4".
MisteR Tee
Ah, Nostalgia, it ain't what it used to be!
No longer wanted: Steel 26/27 Ford Model T coupe rear fenders.
My Intro My website my cars
Cheers both
Sent from my SM-S928B using NSRA mobile app
They were a strange metric pitch ( like Granadas etc). Volvo normally ended up getting restudded to 5 stud Ford ( 5 x 4.5) as Chevy bolt pattern( 5 x 4.75) was leaving it a bit skimpy on stud support . PCD on a 5 stud is done from centre of one stud , miss a bolt and go to OUTSIDE of next stud.
Last edited by kapri; 24-08-24 at 03:48 PM.
Galations 6:7
Galations 6:7
Amazon / 122 / P1800 era Volvos were 5 x 4-1/2" PCD.
Sent from my Kitchen Table using a little box full of smoke and dangerous radio waves
Shine is Fine
Posting Permissions
Reply With Quote
