Coil Spring supplier

[brading]

I need some coil over springs which supplier would you suggest I contact.

[mygasser]

If they're normal 2 1/4" ones rally design keep large stocks, different lengths and poundages.
Neil.

[brading]

Thanks Neil. Just Checked they only do them up to 600lb and I need 800lb

[mygasser]

pretty sure they can get one offs mate. email fao andy or scott.
neil.

[tom.marg]

A HGV Place for that poundage haha!!

[40Stude]

I've had coil springs (as well as leaf springs, including reverse eye and others as well) made to spec by Tested Spring up here in the Midlands. Happy to run your requirements by them if you want

[brading]

I've had coil springs (as well as leaf springs, including reverse eye and others as well) made to spec by Tested Spring up here in the Midlands. Happy to run your requirements by them if you want

That would be good mate. Thank You

[brading]

pretty sure they can get one offs mate. email fao andy or scott.
neil.

Will do mate Thanks

[rem]

At work we use D Faulkner Springs in Chichester (https://dfaulknersprings.com/) for low volume quantities and specials.

[brading]

rem. Thanks for that

[crumble]

I've got to ask. What vehicle are these for? That's very high poundage.

[brading]

J300 Gladiator Jeep with a Wisbech front suspension.

[crumble]

It seems very high poundage. What are you trying to achieve?

[brading]

Someone else is fitting the Wisbech front suspension to my Jeep. Tried it with 600lb spring which were to soft and has now suggested 800lb springs.

[BuffaloBill]

What springs do you have on now? when I had some mods done to my front suspension
Wisbech Eng. fitted Protech shocks and springs and they were far too hard so got in
touch with Protech direct and all sorted! They do the springs for them and have the
800lb ones that you are looking for.

https://www.protechshocks.co.uk/8-2-...-203mm-spring/

[brading]

Thank for that Bill I will give protect a ring tomorrow.