How wide are these supposed to be ? I noticed the rear of mine has started to 'tuck' in !
Sent from my SM-A515F using NSRA mobile app
How wide are these supposed to be ? I noticed the rear of mine has started to 'tuck' in !
Sent from my SM-A515F using NSRA mobile app
They look correct John. The bakelite/interior trim hasn't come loose?
Zetec powered pop ON THE ROAD!!!
Might be Glyn ? I'll have too wriggle myself in over the seat for a look !
Sent from my SM-A515F using NSRA mobile app
You were right Glyn a few screws loose !! It's not perfect tho
Sent from my SM-A515F using NSRA mobile app
a little better at least. As with all the windows, they're quite tricky to fit on your own..
Zetec powered pop ON THE ROAD!!!
Been a few screws loose for many a year
Originally Posted by jsf55
They look about right John. If the glass is a bit small for the window hole the rubber will tuck in.
Did you use Arbomast between body & rubber? This will stick the rubber to the body but if you pump in a fair bit it also fills the void the rubber tucks into.
Every man dies, not every man really lives.
http://www.hotrodphotos.co.uk My Intro My Ride
http://www.case-design.co.uk
Never needed it Mark. I wondercif the 110mph passes might have pushed them in a bit. Job for the winter
Sent from my SM-A515F using NSRA mobile app
Looking at the screw holes into the frame i noticed a few had missed or were in poor condition so the rivnut gun came out !! A few of the holes were missing the metal so i've repositioned these and the other holes will be filled and repainted
Sent from my SM-A515F using NSRA mobile app
Posting Permissions
Reply With Quote
