Been after a tko or tkx box ... i have found a tremec box that a bloke has and thinks is a tremec t5 -but it doesnt look like a t5 looks like a tko to me - the only numbers he can find on it are - c-2605803 and HA260002 just wondering if anyone has any ideas? ill try upload a pic ... any help appreciated - thanks
Maybe some pics now ?Image1733523580.520240.jpgIMG_0894.JPG
Sent from my iPhone using NSRA mobile app
Looks like a 600 ..but i'm no expert
https://libertysgears.com/our-products/tremec/
Sent from my SM-A515F using NSRA mobile app
That’s what it looked like to me but didn’t know how to
confirm and it’s a long way from home ..
Hmm thanks mate … watching that it def looks like a tko500 or 600 hmmm … looks like I may be in a road trip next week … tried to id from the numbers above but got nowhere
Sent from my iPhone using NSRA mobile app
If its not a tko, that it looks exactly much like ( I have one), it'll be a 3550, which is the box that the tko morphed out of. What the differences are I dunno but I suppose the tko was some kind of upgrade.
Chris
Sent from my SM-T515 using NSRA mobile app
Bumper sticker - This is an historic vehicle and only has three speeds....... if you don't like this one you sure as hell won't like the others.
Thanks for that, it’s def what it looked like to me … I’ll see if he can get any other id numbers off it
I've just googled tko v 3550 and there's a handy thread on factory five. In and out spline counts and mounting bolt patterns seem to be the obvious differences, plus a bit of torque capacity.
Chris
Sent from my SM-T515 using NSRA mobile app
Bumper sticker - This is an historic vehicle and only has three speeds....... if you don't like this one you sure as hell won't like the others.
I’ll get the bloke to count splines both ends too .. thanks gents
Sent from my iPhone using NSRA mobile app
Looks like a TKO 500 or 600 to me. Could be GM or Ford application so check spline count and bell housing pattern.
I have a new mid mount shifter for one if needed.
Thanks Steve .. a Ford one can be made to work in a gm application with the correct bell housing I’m led to believe ?
Posting Permissions
Reply With Quote
