Results 1 to 10 of 10

Thread: Slot Mags Wanted

  1. #1
    New guest
    Join Date
    Oct 2025
    Posts
    13

    Slot Mags Wanted

    Looking for something like Ansen Sprints. Must be 5 on a 5? PCD.

    15? rim, 6, 7 or 8? width (or combination front/back). Usable condition is great, don?t care about being all blingy as going for a ?well used? look.

  2. #2
    NSRA member
    Join Date
    Apr 2024
    Posts
    1

    slot mags

    Quote Originally Posted by Andy_CV8 View Post
    Looking for something like Ansen Sprints. Must be 5 on a 5? PCD.

    15? rim, 6, 7 or 8? width (or combination front/back). Usable condition is great, don?t care about being all blingy as going for a ?well used? look.
    Hi Andy ive a set of slot mags Cobra slots for the front are 14" with useable tyres on , the rear are American racing 15s , I do have some 225/75 tyres to go on these wheels both are 7js Had them on my PC Cresta Asking ?300

  3. #3
    New guest
    Join Date
    Oct 2025
    Posts
    13
    Thanks for the reply, but really looking for at least the same make of wheel throughout.

    Kind regards Andy

  4. #4
    NSRA member mygasser's Avatar
    Join Date
    May 2009
    Posts
    8,365
    the make is less important than the slot shape. there's oval slot and 'cornered' slot types so as long as that matches you'd have to take them off to tell the make (cast into the back except woolfrerace/wolfrace where it's on the front lip).
    neil.

  5. #5
    NSRA member crumble's Avatar
    Join Date
    Oct 2003
    Posts
    8,771
    The slots are different. They are not all the same
    Real steel

  6. #6
    New guest
    Join Date
    Oct 2025
    Posts
    13
    Quote Originally Posted by crumble View Post
    The slots are different. They are not all the same
    Indeed, quite different - I looked before my reply. I also have the problem of 14 inch wheels likely not giving enough clearance for even my standard disc callipers, let alone any potential upgrade.

  7. #7
    NSRA member mygasser's Avatar
    Join Date
    May 2009
    Posts
    8,365
    yes there are indeed differences between makes, but i've had same brand sets and the slots look different between wide and skinny ones so....... i guess if you want to hold out then i could take a long time, but that's your choice of course. i'd get ones 'close' so i'm on the road (or further on with the build) and keep a look out for the 'right' ones as time goes on.
    neil.

  8. #8
    New guest
    Join Date
    Oct 2025
    Posts
    13
    I?m a minimum of a year away from this car being on the road, so certainly I?m in ?gathering? mode for essential components to complete the look I?m after. I?m pretty clear about my objectives so no need to buy stuff that won?t work with that.

  9. #9
    NSRA member mygasser's Avatar
    Join Date
    May 2009
    Posts
    8,365
    oh plenty of time then, that's good. do you go to the swap meet in march each year? there always seems to be plenty of slot mags there.
    neil.

  10. #10
    New guest
    Join Date
    Oct 2025
    Posts
    13
    Unfortunately I?m travelling until late spring this year so I?m going to miss that one, but something will turn up, it usually does 😁

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •