My 34 Ford 5 W Coupe

[41 ford pu]

The beginning of the end! It’s been a long time coming and I can’t wait to get behind the wheel. I have to thank Peter for all his hard work!

[mygasser]

very nice, it's one of those colours that looks black all the time except in bright sunlight
neil.

[Acker]

Just reread the whole thread, needed to recap. As Chris said previously "is the time line correct"?
It's going to be a beautiful car when complete, unless it is already!
Peter is very good
Nice one, 41 ford pu

[41 ford pu]

The car has been going on for 13 years! I have hundreds , Maybee thousands of pictures detailing the work over the years. I kinda got a bit fed up at times and even at one point Maybee give up! However I had gone too far and had to Finnish car. I just stopped adding to the thread, just lost a bit of interest. I will start adding pictures that may be of interest to members. If it wasn’t for Peter, the car would never have got done!

[Blackpopracing]

Looks stunning.

[tom.marg]

Smart looking hotrod

[Asbo]

I’d forgotten about this car.. can’t wait to see it ..

[Acker]

The car has been going on for 13 years! I have hundreds , Maybee thousands of pictures detailing the work over the years. I kinda got a bit fed up at times and even at one point Maybee give up! However I had gone too far and had to Finnish car. I just stopped adding to the thread, just lost a bit of interest. I will start adding pictures that may be of interest to members. If it wasn’t for Peter, the car would never have got done!

I have a very good friend who has a steel 3 window 34 and it was finished probably about 35 years ago, drove it a short amount of time then life got in the way and didn't get it out again till 32 years had passed
He still has it and enjoys it
So keep at it.

[41 ford pu]

I have a very good friend who has a steel 3 window 34 and it was finished probably about 35 years ago, drove it a short amount of time then life got in the way and didn't get it out again till 32 years had passed
He still has it and enjoys it
So keep at it.

Oh yes, it will get finnished!

[41 ford pu]

I thought I would show some jobs that went on along the way. The 4 fenders came from Howells sheet metal in the US. however the fronts needed work to make fit. Luckily the rears were good and needed no work.

[tom.marg]

Nice one, gutting when things don’t fit but there all slightly different I guess!!

[Happydaze]

I'm looking forward to seeing it, whenever that might be! I suspect the final push is happening right now!

Chris

Sent from my SM-T515 using NSRA mobile app

[mygasser]

a mate restores classics (mainly fords) and says even the best new panels don't fit. body lines out, wings too short or too long, just lots of cutting about for a decent fit.
neil.

[41 ford pu]

Finnished frame before green!

[41 ford pu]

Th 350 GM Perfomance parts 300 HP crate motor + TH 350 box. Although only done 500 miles from new, been sitting around 13 years! Lots of shiny things to bolt on!

[41 ford pu]

Chassis now going together! I?m sort of getting a bit exited!, won?t be long until body is reunited! Thanks Pete!

[41 ford pu]

Forgot these pics! Chassis is the same colour as body, rest of components are black.

[Happydaze]

Searching for like button!

Chris

Sent from my SM-T515 using NSRA mobile app

[41 ford pu]

Well here we are, body is now in the same room as chassis! Brake lines going in at mo.

[41 ford pu]

Propshaft done, thank you JWE Engineering, Bexleyheath.