Results 1 to 4 of 4

Thread: Cooked bearings and other fun stuff

  1. #1
    NSRA member
    Join Date
    Jun 2003
    Posts
    5,448
    Images
    2

    Cooked bearings and other fun stuff

    Here's 3 of the 4 bearings I've just replaced on my new to me car trailer. I think they've been well cooked! Kinda strange as there was no evidence of play or rumblings when doing the usual tests.

    On purchase all seemed fine, handbrake held well so all must be good, right? Trailer is a quality brand and all seemed good until I noticed the brake compensator looked crooked on one side with the handbrake applied. I'd already performed a brake adjustment on the four wheels and all seemed good. One of the cables had been sawn into by the chassis as the protector on that side was absent, and the cable action wasn't great, so new cable ordered and fitted. I then found the cable on the same side as that with the new cable had significantly more travel than its adjacent friend which explained the ****eyed brake compensator. I'd been resisting taking the drums off because the stupid nuts on the Alko brakes are single use only and not exactly cheap at 30 odd quid a set. But the unequal cable travel indicated an internal problem, so in I went. Drum came off without a fight to reveal one brake shoe having no lining whatsoever, and no evidence of its existence except dust, and not that much! In for a penny and all that and the other three drums quickly removed to reveal in summary a total of 4 linings present of which one was fully detached and 4 MIA! Strange though as the brakes felt and sounded fine when adjusted up, how wrong could I have been! Having reached to point of no return and finding minor evidence of grease leakage from the sealed bearings, which didn't feel that bad, I pressed all the bearings out to find each thoroughly cooked, as pictured! Thankfully the drums were fine as we're the other components in the braking department so it all went back together and seems fine now, with the compensator in a happy place.

    I guess there's a moral to this story and that's to not believe anything unless you've checked it out thoroughly yourself or someone else capable. This trailer had probably never been serviced properly and the brake linings can and will detach from the shoe at a certain age. How many have caravans that see no maintenance and are a breakdown waiting to happen? Be careful out there!

    Chris
    Attached Images Attached Images
    Bumper sticker - This is an historic vehicle and only has three speeds....... if you don't like this one you sure as hell won't like the others.

  2. #2
    Moderator Brizey's Avatar
    Join Date
    Nov 2003
    Posts
    9,134
    Images
    10
    Over the years I`ve borrowed about 4 different car trailers from friends and on picking them up have winced at the condition of the brakes. The last one actually belonging to a friend who runs an MOT garage! Trailers get so used and abused without the proper maintenance that they deserve.
    We bought a folding caravan a few years ago to tow behind the roadster, everything is good on it (an AL-CO chassis) but we`re getting it home serviced by a local company on Tuesday to be safe.
    I cringe at the thought of a trailer carrying a rod and if, through lack of maintenance a problem caused the trailer to turn over!. A caravan having a suspension problem or blowout caused by tyres well past their `sell by date` could fishtail and pull the towing vehicle over too. Better to be safe!...
    "The older i get, the faster i was".
    Out to pasture ...
    My Intro My Rods

  3. #3
    NSRA member mygasser's Avatar
    Join Date
    May 2009
    Posts
    8,434
    a mate jack knifed his caravan and 57/58? cadillac last friday on the way to the hayride on the m25. he got in the ruts near clacketts and got a tank slapper going. the caravan ended up on it's side and the front of the caddy was all smashed in. he's only had the caddy 40 ish years too so like losing a family member.
    neil.

  4. #4
    NSRA member Blackpopracing's Avatar
    Join Date
    Nov 2007
    Posts
    5,157
    Images
    1
    Towing the pop back from the NEC a few years ago on a borrowed trailer, got a proper swing going on the trailer & was 80% sure the thing was going to flip & finish off the pop. This was on the motorway, everyone around me backed off and gave me space, tried to slow gently but swing got worse - ended up stamping on brakes to try to shift the weigh momentum which thankfully worked.

    Turns out it had a blowout on one tyre causing the swing, fitted the spare but that was nearly bald by the time I got home, looking at the wheels the axle was twisted so the blowout tyre had about 1cm toe in!

    I'd thoroughly check a trailer before use if I ever did it again now.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •