im planning on rebuilding my collection of compomotive splitrims over christmas.im swapping centres and rims about but what torque are the bolts done up to and in what sequence is it best to tighten the bolts up in?
im planning on rebuilding my collection of compomotive splitrims over christmas.im swapping centres and rims about but what torque are the bolts done up to and in what sequence is it best to tighten the bolts up in?
star pattern for tightening, not sure on torque but my ally Weld wheels we're 25ft lbs
When i was considering revising some 3 piece wheels i have which comprise compomotive rims i found the tech folks at the compomotive factory in Wolverhampton very helpful. Give 'em a buzz?
Chris
Bumper sticker - This is an historic vehicle and only has three speeds....... if you don't like this one you sure as hell won't like the others.
http://www.the-polisher.com/id6.html
Hope this helps
R
Posting Permissions
Reply With Quote
