a bit of this and a bit of that.

**taxirod** · 26-11-23, 08:11 AM

Thanks for doing the work on my axle.

That's a lot of work on the Minor, are you getting itso they just need to paint and assemble?

**mygasser** · 26-11-23, 09:35 PM

Originally Posted by taxirod

Thanks for doing the work on my axle.

That's a lot of work on the Minor, are you getting itso they just need to paint and assemble?

no problem mate.
yes, just the repairs/alterations and panel fit.
neil.

**v8pop** · 27-11-23, 08:00 AM

Getting there Neil, nice idea on the longer stay, I've still got the scars from my Minor days.

Cheers Tim W

Sent from my M2103K19G using NSRA mobile app

**mygasser** · 27-11-23, 10:51 AM

Originally Posted by v8pop

Getting there Neil, nice idea on the longer stay, I've still got the scars from my Minor days.

Cheers Tim W

Sent from my M2103K19G using NSRA mobile app

cheers Tim,
yes i liked it too. it's from one of the minor specialists.
i've had a few mercedes as dailies and reckon i must've banged my head on all the grills.

neil.

**mygasser** · 27-11-23, 11:37 PM

i've got one of those water based silver nitrate 'chrome' paint kits here to try. i've been meaning to try them for a while now and as this kit came in a deal it's time to give it a go.
the deal typically for me worked out well, i had some parts here a mate wanted and he had my old 04 c-max diesel which he'd recently taken for a swim in a flood. it was sitting lower that day as he'd just picked up a ford 302/c4 combo in the back, lol. from past experience when diesels hydraulic they bend/shorten the conrods like a concertina so there's not enough compression to fire the diesel. anyway he offered me the car and the chrome kit for the parts he wanted, result. i.m not keen on doing anything to 'modern' vehicles but i can get a low mileage engine for £220 making it a good earner so worth the trouble.
neil.

**v8pop** · 28-11-23, 08:06 AM

Be interesting to see the results of the kit Neil.

Cheers Tim W

Sent from my M2103K19G using NSRA mobile app

**taxirod** · 29-11-23, 01:52 PM

When I looked up these kits, they were expensive......perhaps I should just send the bits I want chromed to you!

**mygasser** · 29-11-23, 02:23 PM

Originally Posted by taxirod

When I looked up these kits, they were expensive......perhaps I should just send the bits I want chromed to you!

let me see how it goes first. ashley's already asked me to do both axles among other things for his zephyr rebuild. he is a tart/magpie though

neil.

**taxirod** · 29-11-23, 04:03 PM

Hey, thats given me an idea.....while you've got my front axle, you might as well try it, I'll only charge you a modest sum for using my axle as a guinea pig....

**mygasser** · 29-11-23, 04:38 PM

Originally Posted by taxirod

Hey, thats given me an idea.....while you've got my front axle, you might as well try it, I'll only charge you a modest sum for using my axle as a guinea pig....

mmmmmmmmm....................

**mygasser** · 30-11-23, 04:45 PM

we had a good couple of days and got both wings fitting nicely with decent gaps at the 'a' posts and to the bonnet.
i think...... the last job now is to take the front panel off again and secure the inner and outer parts together to stop them rattling and then refit it.
neil.

**BadAC** · 30-11-23, 05:22 PM

Ya don't see many minors with that sort of gapping.

V nice.

Sent from my moto e30 using NSRA mobile app

**mygasser** · 30-11-23, 10:13 PM

thanks

. the better we can get it now the cheaper the bill will be when it goes for paint.
neil.

**West** · 30-11-23, 10:17 PM

Gaps are spot on, small details

**tom.marg** · 30-11-23, 10:39 PM

Bet that’s nicer to make good as they are steel !!!

**mygasser** · 30-11-23, 11:42 PM

Originally Posted by tom.marg

Bet that’s nicer to make good as they are steel !!!

that's for sure mate

**v8pop** · 01-12-23, 08:04 AM

Gaps look good Neil, nearly done now mate.

What's next on the horizon?

Cheers Tim W

Sent from my M2103K19G using NSRA mobile app

**mygasser** · 01-12-23, 11:36 AM

i've got to sneak my old c-max now i've got it back. it needs an engine swap after it went for a swim and dydrauliked. i've got one on the way so hopefully it shouldn't take too long.
also ian's (taxirod) morris front axle is here and needs an mgb brake conversion so some lathe work ahead.
neil.

**mygasser** · 01-12-23, 10:14 PM

that appears to be that then. we made 4 tabs and welded them to the inner front panel and they bolt to the outer panel.
also the 2 pieces that aren't under the dash anymore (

) have been remade and welded in place, the glovebox door and o/s blank panel now have something to bolt to again. no pics as you all know what a tab looks like, lol.
neil.

**v8pop** · 02-12-23, 08:10 AM

Ha ha

Cheers Tim W

Sent from my M2103K19G using NSRA mobile app

Thread: a bit of this and a bit of that.

Thread Tools

Display

Posting Permissions