Who cares If It's glass or steel, It's still a hot rod.
Thanks Martin
Starting ay the top this is the original rear crossmember mount i made up for the jag rear an idea i copied from Craig House's pop build. The use of land rover spring bushes and 38mm hydraulic tube (free) made for some isolation on the rear end ala jaguars original idea
I used the same set up when mounting the LS engine why not the parts ! Anyway there's been a bit of vibration so was looking too change these out. Looking through parts i came across the poly set up so ordered some up. They need a bit of persuading to fit the mounts but hopefully the vibration will go
looks like the diff mount bushes were failing judging by the misalignment in the 1st pic so your replacements couldn't have come soon enough.
good idea using a nut and bolt to spread the mounting plates apart
neil.
Yes Neil, it's moved over and giving some vibration through the chassis that wasn't there before, winter maintenance 26/27 all in hand !!
Posting Permissions
Reply With Quote
