Work has halted a lot of progress, and also been sourcing bits for the vacuum modulator for the trans and all the other vacuum hoses.

I searched all over the net for stainless or any other 1/4" or 6mm tubing, could not find anything (except copper) longer than 600-900mm except the brass tube in B&Q.

Never mind, the brass looks nice n shiny

This is how it looked after bending up;



and fitted to gearbox;



and plumbed to inlet manifold.



Still need to T into this bit for the vacuum gauge.

Other jobs have been little things like fitting grommets and fine tuning the length of the Aeroquip hoses.