Wanted, 11 inch clutch Bell housing

[dontheyank]

I need an SBC 11 in Clutch bell housing GM Part number 3899621 to match up with my T5 for my 1960 Truck project. I have a 10.5 inch but have an 11 inch clutch...open to swaps or straight up purchase. Cheers

[mygasser]

easier and probably cheaper to get a 10 1/2" clutch kit.
neil.
https://www.rockauto.com/en/catalog/...lutch+kit,1993

[its still redoxide]

I have a roadcraft SBC to T5 ali Bellhousing , new unused in the loft . I would consider selling. It would be cheeper than a new roadcraft one .

Its for chevy V8 to Tremek T5 Ford pattern , so wont be suitable for all T5s. Its suitable for 158 and 163 tooth flywheels . It doesnt say much about clutch diam but given the differing flywheels probably points to the larger clutch fitting . Its just a bare bellhousing , no clutch fork or release bearing .. ?350 if its of any use . ( this is where the smaller clutch comes into its own price wise )

[dontheyank]

Thanks, but my T5 is a GM mounting pattern and I dont have an adapter.

I have a roadcraft SBC to T5 ali Bellhousing , new unused in the loft . I would consider selling. It would be cheeper than a new roadcraft one .

Its for chevy V8 to Tremek T5 Ford pattern , so wont be suitable for all T5s. Its suitable for 158 and 163 tooth flywheels . It doesnt say much about clutch diam but given the differing flywheels probably points to the larger clutch fitting . Its just a bare bellhousing , no clutch fork or release bearing .. ?350 if its of any use . ( this is where the smaller clutch comes into its own price wise )

[mygasser]

did you click on the rock auto link i posted above?
neil.